|
Engine and Emissions, Fuels and Lubricants |
|
|
OPTICAL STUDY ON SPRAY AND TWO-STAGE IGNITION
CHARACTERISTICS FOR DIESEL SPRAY UNDER LOW AMBIENT
TEMPERATURE AND DENSITY CONDITIONS
Yikai Li , Zefeng Xue , Zhongjie Shi , Haiyan Chen , Weiwei Lv
Int J Automot Technol. 2023;24(5):1241-1257. DOI: https://doi.org/10.1007/s12239-023-0101-y
 
|
Cited By 1 |
|
|
|
|
|
Electric, Fuel Cell, and Hybrid Vehicle |
|
|
ENERGY MANAGEMENT STRATEGY OF PLUG-IN HYBRID ELECTRIC
VEHICLES CONSIDERING THERMAL CHARACTERISTICS
Dafeng Song , Daokun Bi , Xiaohua Zeng , Shiyuan Wang
Int J Automot Technol. 2023;24(3):655-668. DOI: https://doi.org/10.1007/s12239-023-0055-0
|
|
Cited By 3 |
|
|
|
|
|
Chassis, Electrical and Electronics, Vehicle Dynamics and Control |
|
|
MODELING AND ANALYZING INDIVIDUAL DRIVER’S STEERING
BEHAVIOR BASED ON ROLLING LOCAL-PATH PLANNING DECISION
Xiaobing Chen , Qiang Yao , Ju Zhang
Int J Automot Technol. 2023;24(2):389-400. DOI: https://doi.org/10.1007/s12239-023-0033-6
|
|
|
|
|
Engine and Emissions, Fuels and Lubricants |
|
|
CHARACTERISTICS OF SPRAY NEAR THE NOZZLE AND TIP WETTING
IN AN ENLARGED GDI INJECTOR STEP-HOLE NOZZLE
Byunggyun Kim , Mengzhao Chang , Suhan Park
Int J Automot Technol. 2023;24(1):207-218. DOI: https://doi.org/10.1007/s12239-023-0019-4
|
|
|
|
|
Engine and Emissions |
|
|
ANALYSIS OF AERODYNAMIC CHARACTERISTICS OF REAR WING MOUNTED ON FASTBACK TYPE VEHICLE
Pyungkee Kim , Wonseok Choi , d Kyu Hong Kim
Int J Automot Technol. 2022;23(5):1255-1268. DOI: https://doi.org/10.1007/s12239-022-0110-2
|
|
|
|
|
Body and Safety |
|
|
METHOD OF HMI OPTIMIZATION DESIGN BASED ON FIXATION TRANSITION CHARACTERISTICS AND VISUAL ATTENTION TRAJECTORY: A DRIVER SIMULATOR STUDY
Dunli Hu , Xinyu Yang , Xiaohua Zhao , Xuewei Li , Xiaofan Feng , Jiaxia Yang
Int J Automot Technol. 2022;23(4):1127-1140. DOI: https://doi.org/10.1007/s12239-022-0099-6
|
|
|
|
|
Engine and Emissions, Fuels and Lubricants |
|
|
SPRAY DEVELOPMENT PROCESS UTILIZING A MULTI-HOLE
GDI INJECTOR WITH DIFFERENT SPRAY HOLE LENGTHS AND
STEP HOLE DIAMETERS
Jeonghwan Park, Sungwook Park
Int J Automot Technol. 2022;23(3):641-649. DOI: https://doi.org/10.1007/s12239-022-0058-2
|
|
Cited By 1 |
|
|
|
|
|
Connected Automated Vehicles and ITS, Electric, Fuel Cell, and Hybrid Vehicle, Vehicle Dynamics and Control |
|
|
ANALYSIS AND OPTIMIZATION OF BEAM OPENING ANGLE OF
TORSION BEAM SUSPENSION TO IMPROVE FREQUENCY RESPONSE
CHARACTERISTICS OF WHOLE VEHICLE
Jin Gao , Peifeng Han
Int J Automot Technol. 2022;23(3):623-640. DOI: https://doi.org/10.1007/s12239-022-0057-3
|
|
Cited By 1 |
|
|
|
|
|
Engine and Emissions |
|
|
EFFECTS OF INJECTION STRATEGY ON THE NANO-PARTICLE EMISSION CHARACTERISTICS OF A DIRECT INJECTION DIESEL ENGINE
Seung Hyun Yoon, Suhan Park
Int J Automot Technol. 2022;23(2):529-539. DOI: https://doi.org/10.1007/s12239-022-0049-3
|
|
|
|
|
Materials and Recycling |
|
|
ENERGY ABSORPTION CHARACTERISTICS OF CRASH BOX OF NEW HONEYCOMB CORE STRUCTURE WITH FOAM-FILLED
Xiang Li, Yanmiao Wang, Xingxing Xu, Xiangbin Cao, Rui Li
Int J Automot Technol. 2021;22(1):221-230. DOI: https://doi.org/10.1007/s12239-021-0022-6
|
|
Cited By 7 |
|
|
|
|
|
Connected Automated Vehicles and ITS, Vehicle Dynamics and Control |
|
|
STUDY ON THE EFFECT OF STIFFNESS MATCHING OF ANTI-ROLL BAR IN FRONT AND REAR OF VEHICLE ON THE HANDLING STABILITY
Jin Gao, Fuquan Wu, Zhixin Li
Int J Automot Technol. 2021;22(1):185-199. DOI: https://doi.org/10.1007/s12239-021-0019-1
|
|
Cited By 9 |
|
|
|
|
|
Engine and Emissions, Fuels and Lubricants |
|
|
STUDY ON TRANSIENT FUEL HYDRODYNAMIC FORCE CHARACTERISTICS OF HIGH-SPEED SOLENOID VALVE FOR COMMON RAIL INJECTOR
Jianhui Zhao, Shunan Zhao, Leonid Grekho
Int J Automot Technol. 2020;21(5):1257-1269. DOI: https://doi.org/10.1007/s12239-020-0119-3
|
|
|
|
|
Connected Automated Vehicles and ITS |
|
|
SITUATION ASSESSMENT FOR LANE-CHANGING RISK BASED ON DRIVER’S PERCEPTION OF ADJACENT REAR VEHICLES
Jie Ni, Jinwen Han, Zhiqiang Liu, Fei Dong
Int J Automot Technol. 2020;21(2):427-439. DOI: https://doi.org/10.1007/s12239-020-0040-9
|
|
Cited By 3 |
|
|
|
|
|
Chassis |
|
|
SIMULATION AND EXPERIMENTAL STUDY OF A NEW ELECTROMECHANICAL BRAKE WITH AUTOMATIC WEAR ADJUSTMENT FUNCTION
Yun Feng Fu, Xin Hua Hu, Wei Rui Wang, Zheng Ge
Int J Automot Technol. 2020;21(1):227-238. DOI: https://doi.org/10.1007/s12239-020-0022-y
|
|
Cited By 14 |
|
|
|
|
|
Electric, Fuel Cell, and Hybrid Vehicle |
|
|
VEHICLE DECELERATION PREDICTION BASED ON DEEP NEURAL NETWORK AT BRAKING CONDITIONS
Kyunghan Min, Kyuhwan Yeon, Yuhyeok Jo, Gyubin Sim, Myoungho Sunwoo, Manbae Han
Int J Automot Technol. 2020;21(1):91-102. DOI: https://doi.org/10.1007/s12239-020-0010-2
|
|
Cited By 11 |
|
|
|
|
|
Engine and Emissions, Heat Transfer, Fluid and Thermal Engineering |
|
|
THEORETICAL AND EXPERIMENTAL STUDY ON
FLOW CHARACTERISTICS OF A DIAPHRAGM PUMP FOR
UREA-SCR SYSTEMS
Shu Dong Yang, You Cheng Shi, Xi Wei Pan, Yin Shui Liu
Int J Automot Technol. 2019;20(4):835-844. DOI: https://doi.org/10.1007/s12239-019-0078-8
|
|
Cited By 1 |
|
|
|
|
|
Fuels and Lubricants |
|
|
INFLUENCE OF BIODIESEL BLENDED IN GASOLINE-BASED FUELS ON MACROSCOPIC SPRAY STRUCTURE FROM A DIESEL INJECTOR
Sakda Thongchai, Ocktaeck Lim
Int J Automot Technol. 2019;20(4):701-711. DOI: https://doi.org/10.1007/s12239-019-0066-z
|
|
Cited By 6 |
|
|
|
|
|
Engine and Emissions, Fuels and Lubricants |
|
|
GASEOUS EMISSIONS AND PARTICLE MICROSTRUCTURE CHARACTERISTICS OF PODE/DIESEL BLEND FUEL
Wanying Gao, Junheng Liu, Ping Sun, Chen Yang, Jia Fang
Int J Automot Technol. 2019;20(3):607-617. DOI: https://doi.org/10.1007/s12239-019-0058-z
|
|
Cited By 19 |
|
|
|
|
|
Engine and Emissions, Fuels and Lubricants |
|
|
EFFECT OF POLYOXYMETHYLENE DIMETHYL ETHERS/DIESEL BLENDS ON FUEL PROPERTIES AND PARTICULATE MATTER OXIDATION ACTIVITY OF A LIGHT-DUTY DIESEL ENGINE
Jing Tian, Yixi Cai, Yunxi Shi, Yingxin Cui, Runlin Fan
Int J Automot Technol. 2019;20(2):277-288. DOI: https://doi.org/10.1007/s12239-019-0027-6
|
|
Cited By 8 |
|
|
|
|
|
Vehicle Dynamics |
|
|
INTELLIGENT STRUCTURAL DESIGN OF TRANSPORT PNEUMATIC SUSPENSIONS WITH EXTREME CHARACTERISTICS
Chang-Myung Lee, Vladimir Goverdovskiy
Int J Automot Technol. 2019;20(1):1-10. DOI: https://doi.org/10.1007/s12239-019-0001-3
|
|
Cited By 2 |
|
|
|
|
|
Fuels and Lubricants |
|
|
EVALUATION AND MEASUREMENT THE RECOVERED ENERGY FROM
AUTOMOBILE SUSPENSION IN THE OPERATION CONDITIONS
Veronel-George Jacotă, Eugen-Mihai Negruş, Marius Florin Toma
Int J Automot Technol. 2018;19(6):1049-1054. DOI: https://doi.org/10.1007/s12239-018-0102-4
|
|
Cited By 2 |
|
|
|
|
|
Engine and Emissions |
|
|
EFFECT OF HEAVY-DUTY DIESEL ENGINE OPERATING PARAMETERS ON PARTICLE NUMBER AND SIZE DISTRIBUTION AT LOW SPEED CONDITION
Bin Yang Wu, Qiang Zhan, Shun Kai Zhang, Xiao Kun Nie, Yu Han Li, Wanhua Su
Int J Automot Technol. 2018;19(4):623-633. DOI: https://doi.org/10.1007/s12239-018-0059-3
|
|
Cited By 10 |
|
|
|
|
|
Alternative Energy & Vehicle |
|
|
INJECTION CHARACTERISTICS OF PALM METHYL ESTER BLENDED WITH DIESEL USING ZUECH’S CHAMBER
Prathan Srichai, Pop-Paul Ewphun, Chinda Charoenphonphanich, Preechar Karin, Manida Tongroon, Nuwong Chollacoop
Int J Automot Technol. 2018;19(3):535-545. DOI: https://doi.org/10.1007/s12239-018-0051-y
|
|
Cited By 6 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
|
DYNAMICS CHARACTERISTICS ANALYSIS AND CONTROL OF FWID EV
Dongmei Wu, Haitao Ding, Changqing Du
Int J Automot Technol. 2018;19(1):135-146. DOI: https://doi.org/10.1007/s12239-018-0013-4
|
|
Cited By 10 |
|
|
|
|
|
Engine, Emission Technology |
|
|
NUMERICAL STUDY OF THE EARLY INJECTION PARAMETERS ON WALL WETTING CHARACTERISTICS OF AN HCCI DIESEL ENGINE USING EARLY INJECTION STRATEGY
Hanzhengnan Yu, Xingyu Liang, Gequn Shu
Int J Automot Technol. 2017;18(5):759-768. DOI: https://doi.org/10.1007/s12239-017-0075-8
|
|
Cited By 15 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
HYBRID MODELING OF SEAT-CAB COUPLED SYSTEM FOR TRUCK
L. L. ZHAO, C. C. ZHOU, Y. W. YU
Int J Automot Technol. 2016;17(5):769-776. DOI: https://doi.org/10.1007/s12239-016-0076-z
|
|
Cited By 15 |
|
|
|
|
|
Engine, Emission Technology |
|
|
INFLUENCE OF PILOT INJECTION ON COMBUSTION CHARACTERISTICS AND EMISSIONS IN A DI DIESEL ENGINE FUELED WITH DIESEL AND DME
J. H. JEONG, D. W. JUNG, O. T. LIM, Y. D. PYO, Y. J. LEE
Int J Automot Technol. 2014;15(6):861-869. DOI: https://doi.org/10.1007/s12239-014-0090-y
|
|
Cited By 14 |
|
|
|
|
|
Engine, Emission Technology |
|
|
IMPROVEMENT OF COMBUSTION EFFICIENCY AND EMISSION CHARACTERISTICS OF IC DIESEL ENGINE OPERATING ON ESC CYCLE APPLYING VARIABLE GEOMETRY TURBOCHARGER (VGT) WITH VANELESS TURBINE VOLUTE
D. SAMOILENKO, M. CHO
Int J Automot Technol. 2013;14(4):521-528. DOI: https://doi.org/10.1007/s12239-013-0056-5
|
|
Cited By 8 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
|
DYNAMIC ANALYSIS OF ENERGY STORAGE UNIT OF THE HYDRAULIC HYBRID VEHICLE
Y.-L. CHEN, S.-A. LIU, J.-H. JIANG, T. SHANG, Y.-K. ZHANG, W. WEI
Int J Automot Technol. 2013;14(1):101-112. DOI: https://doi.org/10.1007/s12239-013-0012-4
|
|
Cited By 24 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
|
EXPERIMENTAL STUDIES ON THE HEATING PERFORMANCE OF THE PTC HEATER AND HEAT PUMP COMBINED SYSTEM IN FUEL CELLS AND ELECTRIC VEHICLES
K. Y. KIM, S. C. KIM, M. S. KIM
Int J Automot Technol. 2012;13(6):971-977. DOI: https://doi.org/10.1007/s12239-012-0099-z
|
|
Cited By 51 |
|
|
|
|
> Browse Articles > Search
