|
|
|
Engine, Emission Technology |
|
539 |
DIESEL NOZZLE GEOMETRIES ON SPRAY CHARACTERISTICS WITH A SPRAY MODEL COUPLED WITH NOZZLE CAVITATING FLOW
F. WANG, Z. HE, J. LIU, Q. WANG
Int J Automot Technol. 2015;16(4):539-549. DOI: https://doi.org/10.1007/s12239-015-0055-9
 
|
Cited By 28 |
|
|
|
|
|
Engine, Emission Technology |
|
551 |
ON-ROAD CHASING AND LABORATORY MEASUREMENTS OF EXHAUST PARTICLE EMISSIONS OF DIESEL VEHICLES EQUIPPED WITH AFTERTREATMENT TECHNOLOGIES (DPF, UREA-SCR)
S. H. LEE, J. H. KWAK, S. Y. LEE, J. H. LEE
Int J Automot Technol. 2015;16(4):551-559. DOI: https://doi.org/10.1007/s12239-015-0056-8
|
|
Cited By 36 |
|
|
|
|
|
Engine, Emission Technology |
|
561 |
MODEL-BASED FEEDFORWARD CONTROL OF THE VGT IN A DIESEL ENGINE BASED ON EMPIRICAL MODELS OF COMPRESSOR AND TURBINE EFFICIENCIES
Y. PARK, I. PARK, K. MIN, M. SUNWOO
Int J Automot Technol. 2015;16(4):561-570. DOI: https://doi.org/10.1007/s12239-015-0057-7
|
|
Cited By 9 |
|
|
|
|
|
Engine, Emission Technology |
|
571 |
EFFECT OF PILOT INJECTION ON ENGINE NOISE IN A SINGLE CYLINDER COMPRESSION IGNITION ENGINE
S. J. YOON, B. PARK, J. PARK, S. PARK
Int J Automot Technol. 2015;16(4):571-579. DOI: https://doi.org/10.1007/s12239-015-0058-6
|
|
Cited By 11 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
581 |
CONTROLLER DESIGN FOR A SEMI-TRACK AIR-CUSHION VEHICLE
C. MA, D. HE, D. XIE, F. YU, Z. LUO
Int J Automot Technol. 2015;16(4):581-591. DOI: https://doi.org/10.1007/s12239-015-0059-5
|
|
Cited By 1 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
593 |
ATTITUDE MOTION CONTROL OF THE ACTIVE SUSPENSION SYSTEM WITH TRACKING CONTROLLER
I. YOUN, L. WU, E. YOUN, M. TOMIZUKA
Int J Automot Technol. 2015;16(4):593-601. DOI: https://doi.org/10.1007/s12239-015-0060-z
|
|
Cited By 31 |
|
|
|
|
|
Automobile Body and Safety |
|
603 |
RELATIONSHIP OF THE ROOF STRENGTH RESISTANCE WITH THE DISPLACEMENT OF TOP-END OF A-PILLAR IN CRIS TEST
B. K. HAN, E. D. LEE, S. M. JANG
Int J Automot Technol. 2015;16(4):603-610. DOI: https://doi.org/10.1007/s12239-015-0061-y
|
|
Cited By 3 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
611 |
COMPARATIVE STUDY OF FINITE ELEMENT ANALYSIS IN TUBE HYDROFORMING OF STAINLESS STEEL 304
P. THANAKIJKASEM, A. PATTARANGKUN, S. MAHABUNPHACHAI, V. UTHAISANGSUK, S. CHUTIMA
Int J Automot Technol. 2015;16(4):611-617. DOI: https://doi.org/10.1007/s12239-015-0062-x
|
|
Cited By 10 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
619 |
EFFECT OF HOT-STAMPING PROCESS CONDITIONS ON THE CHANGES IN MATERIAL STRENGTH
Y. J. JEON, M. J. SONG, H. K. KIM, B. S. CHA
Int J Automot Technol. 2015;16(4):619-627. DOI: https://doi.org/10.1007/s12239-015-0063-9
|
|
Cited By 9 |
|
|
|
|
|
Automobile Electronics |
|
629 |
DESIGN OF REAR GLASS-INTEGRATED ANTENNAS WITH VERTICAL LINE OPTIMIZATION FOR FM RADIO RECEPTION
G. G. BYUN, Y. G. NOH, I. M. PARK, H. S. CHOO
Int J Automot Technol. 2015;16(4):629-634. DOI: https://doi.org/10.1007/s12239-015-0064-8
|
|
Cited By 5 |
|
|
|
|
|
Automobile Electronics |
|
635 |
GUARANTEEING END-TO-END DEADLINES FOR AUTOSAR-BASED AUTOMOTIVE SOFTWARE
H. YOON, M. RYU
Int J Automot Technol. 2015;16(4):635-644. DOI: https://doi.org/10.1007/s12239-015-0065-7
|
|
Cited By 6 |
|
|
|
|
|
Automobile Electronics |
|
645 |
PIEZOELECTRIC ENERGY HARVESTING FROM TORSIONAL VIBRATION IN INTERNAL COMBUSTION ENGINES
G. W. KIM
Int J Automot Technol. 2015;16(4):645-651. DOI: https://doi.org/10.1007/s12239-015-0066-6
|
|
Cited By 26 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
653 |
REAL-TIME PATH PLANNING OF AUTONOMOUS VEHICLES FOR UNSTRUCTURED ROAD NAVIGATION
K. CHU, J. KIM, K. JO, M. SUNWOO
Int J Automot Technol. 2015;16(4):653-668. DOI: https://doi.org/10.1007/s12239-015-0067-5
|
|
Cited By 45 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
669 |
CORNERING STIFFNESS AND SIDESLIP ANGLE ESTIMATION BASED ON SIMPLIFIED LATERAL DYNAMIC MODELS FOR FOUR-IN-WHEEL-MOTOR-DRIVEN ELECTRIC VEHICLES WITH LATERAL TIRE FORCE INFORMATION
Y. F. LIAN, Y. ZHAO, L. L. HU, Y. T. TIAN
Int J Automot Technol. 2015;16(4):669-683. DOI: https://doi.org/10.1007/s12239-015-0068-4
|
|
Cited By 40 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
685 |
DRIVING CYCLE RECOGNITION NEURAL NETWORK ALGORITHM BASED ON THE SLIDING TIME WINDOW FOR HYBRID ELECTRIC VEHICLES
J. WANG, Q. N. WANG, X. H. ZENG, P. Y. WANG, J. N. WANG
Int J Automot Technol. 2015;16(4):685-695. DOI: https://doi.org/10.1007/s12239-015-0069-3
|
|
Cited By 39 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
697 |
SYSTEMATIC SYNTHESIS METHOD AND PROTOTYPING OF FIXEDAXLE VEHICULAR ELECTRIFIED MECHANICAL TRANSMISSION
H. ZHANG, Z. ZHONG, X. CHEN
Int J Automot Technol. 2015;16(4):697-705. DOI: https://doi.org/10.1007/s12239-015-0070-x
|
|
Cited By 10 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
707 |
STARTING REQUIREMENTS OF A RANGE EXTENDER FOR ELECTRIC VEHICLES: BASED ON A SMALL SIZE 4-STROKE ENGINE
M. GEBREHIWOT, A. VAN DEN BOSSCHE
Int J Automot Technol. 2015;16(4):707-713. DOI: https://doi.org/10.1007/s12239-015-0071-9
|
|
Cited By 10 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
715 |
ENHANCMENT OF QZSC FED DRIVE PERFORMANCE WITH FPSO CONTROLLER
M. RANJANI, P. MURUGESAN
Int J Automot Technol. 2015;16(4):715-720. DOI: https://doi.org/10.1007/s12239-015-0072-8
|
|
|
|
> Previous issue
