|
|
|
Engine, Emission Technology |
|
437 |
STUDY OF CORRELATION BETWEEN WETTED FUEL FOOTPRINTS ON COMBUSTION CHAMBER WALLS AND UBHC IN ENGINE START PROCESSES
H. KIM, S. YOON, M.-C. LAI
Int J Automot Technol. 2005;6(5):437-444.
|
|
|
|
|
Engine, Emission Technology |
|
445 |
CHANGE OF CATALYST TEMPERATURE WITH UEGI TECHNOLOGY DURING COLD START
Y.-S. CHO, D.-S. KIM
Int J Automot Technol. 2005;6(5):445-451.
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
453 |
STUDY ON THE IN-CYLINDER FLOW CHARACTERISTICS OF AN SI ENGINE USING PIV
S.-Y. LEE, K.-S. JEONG, C.-H. JEON, Y.-J. CHANG
Int J Automot Technol. 2005;6(5):453-460.
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
461 |
DEVELOPMENT OF AUTOMATIC CLUTCH ACTUATOR FOR AUTOMATED MANUAL TRANSMISSIONS
S. E. MOON, H. S. KIM, S. H. HWANG
Int J Automot Technol. 2005;6(5):461-466.
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
467 |
CONCEPTUAL DESIGN OF INNER-SPHERICAL CONTINUOUSLY VARIABLE TRANSMISSION FOR BICYCLE USAGE
S. H. SEONG, J. H. RYU, H. W. LEE, N. G. PARK
Int J Automot Technol. 2005;6(5):467-473.
|
|
|
|
|
Automobile Body and Safety |
|
475 |
VEHICLE SPEED ESTIMATION BASED ON KALMAN FILTERING OF ACCELEROMETER AND WHEEL SPEED MEASUREMENTS
J. K. HWANG, M. UCHANSKI, C. K. SONG
Int J Automot Technol. 2005;6(5):475-481.
|
|
|
|
|
Automobile Body and Safety |
|
483 |
STUDY ON RIDE QUALITY OF A HEAVY-DUTY OFF-ROAD VEHICLE WITH A NONLINEAR HYDROPNEUMATIC SPRING
T. SUN, F. YU
Int J Automot Technol. 2005;6(5):483-489.
|
|
|
|
|
Automobile Body and Safety |
|
491 |
CRASHWORTHINESS IMPROVEMENT OF VEHICLE-TO-RIGID FIXED BARRIER IN FULL FRONTAL IMPACT USING NOVEL VEHICLE’S FRONT-END STRUCTURES
A. M. ELMARAKBI, J. W. ZU
Int J Automot Technol. 2005;6(5):491-499.
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
501 |
ENERGY ABSORPTION CHARACTERISTICS IN SQUARE OR CIRCULAR SHAPED ALUMINUM/CFRP COMPOUND TUBES UNDER AXIAL COMPRESSION
C. S. CHA, K. S. LEE, J. O. CHUNG, H. K. MIN, S. B. PYEON, I. Y. YANG
Int J Automot Technol. 2005;6(5):501-506.
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
507 |
QUALITY STABILIZATION OF BALL SEAT IN AUTOMOTIVE SUSPENSION PARTS
T.-H. KANG, I.-K. KIM, Y.-S. KIM
Int J Automot Technol. 2005;6(5):507-511.
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
513 |
FATIGUE DURABILITY ASSESSMENT OF FULL-BEAD OF MLS GASKET USING FINITE ELEMENT ANALYSIS
S.-S. CHO, B. K. HAN, J.-H. LEE, H. CHANG, B. K. KIM
Int J Automot Technol. 2005;6(5):513-517.
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
519 |
JOINING OF THIN-WALLED ALUMINUM TUBE BY ELECTROMAGNETIC FORMING (EMF)
Y.-B. PARK, H.-Y. KIM, S.-I. OH
Int J Automot Technol. 2005;6(5):519-527.
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
529 |
FUZZY TORQUE CONTROL STRATEGY FOR PARALLEL HYBRID ELECTRIC VEHICLES
J.-H. PU, C.-L. YIN, J.-W. ZHANG
Int J Automot Technol. 2005;6(5):529-536.
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
537 |
EFFICIENCY MEASUREMENT AND ENERGY ANALYSIS FOR A HEV BENCH TESTER AND DEVELOPMENT OF PERFORMANCE SIMULATOR
K. OH, D. KIM, T. KIM, C. KIM, H. KIM
Int J Automot Technol. 2005;6(5):537-544.
|
|
|
|
|
Other Fields of Automotive Engineering |
|
545 |
VIRTUAL PASSIVITY-BASED DECENTRALIZED CONTROL OF MULTIPLE 3-WHEELED MOBILE ROBOTIC SYSTEMS VIA SYSTEM AUGMENTATION
J. H. SUH, K. S. LEE
Int J Automot Technol. 2005;6(5):545-554.
|
|
|
|
> Previous issue
