Home | KSAE | E-Submission | Sitemap | Contact Us |  
top_img
Previous issue > Previous issue



Table of Contents | October, 2011  Vol. 12 No. 5 Previous Issue | Next Issue | Archive
Articles
 Engine, Emission Technology
631 ESTIMATION OF VALVE SPRING SURGE AMPLITUDE USING THE VARIABLE NATURAL FREQUENCY AND THE DAMPING RATIO
H. LIU, Dojoong Kim
Int J Automot Technol. 2011;12(5):631-638.    DOI: https://doi.org/10.1007/s12239-011-0073-1
         Cited By 6
 Engine, Emission Technology
639 EFFECT OF A 2-STAGE INJECTION STRATEGY ON THE COMBUSTION AND FLAME CHARACTERISTICS IN A PCCI ENGINE
YUNGJIN KIM, Kibum Kim, Ki-hyung Lee
Int J Automot Technol. 2011;12(5):639-644.    DOI: https://doi.org/10.1007/s12239-011-0074-0
         Cited By 30
 Engine, Emission Technology
645 COMBUSTION PHASE DETECTION ALGORITHM FOR FOUR-CYLINDER CONTROLLED AUTOIGNITION ENGINES USING IN-CYLINDER PRESSURE INFORMATION
Minkwang Lee, Seungsuk Oh, Myoungho Sunwoo
Int J Automot Technol. 2011;12(5):645-652.    DOI: https://doi.org/10.1007/s12239-011-0075-z
         Cited By 6
 Engine, Emission Technology
653 EFFECT OF FUEL STRATIFICATION ON INITIAL FLAME EFFECT OF FUEL STRATIFICATION ON INITIAL FLAME
In-Yong Ohm, Chanjun Park
Int J Automot Technol. 2011;12(5):653-660.    DOI: https://doi.org/10.1007/s12239-011-0076-y
         Cited By 4
 Automobile Chassis & Vehicle Dynamic
661 ON THE FEASIBILITY OF THE OPTICAL STEERING WHEEL SENSOR: MODELING AND CONTROL
D. PAUL, D. PAUL
Int J Automot Technol. 2011;12(5):661-669.    DOI: https://doi.org/10.1007/s12239-011-0077-x
         Cited By 4
 Automobile Chassis & Vehicle Dynamic
671 PARAMETER IDENTIFICATION FOR A LUGRE MODEL BASED ON STEADY-STATE TIRE CONDITIONS
X. D. WU, S. G. ZUO, L. LEI, X. W. YANG, Y. LI
Int J Automot Technol. 2011;12(5):671-677.    DOI: https://doi.org/10.1007/s12239-011-0078-9
         Cited By 13
 Automobile Chassis & Vehicle Dynamic
679 COMPREHENSIVE LATERAL DRIVER MODEL FOR CRITICAL MANEUVERING CONDITIONS
H.-Z. LI, L. LI, J. SONG, L.-Y. YU
Int J Automot Technol. 2011;12(5):679-686.    DOI: https://doi.org/10.1007/s12239-011-0079-8
         Cited By 17
 Automobile Body and Safety
687 AUTOMOTIVE WINDSHIELD - PEDESTRIAN HEAD IMPACT: ENERGY ABSORPTION CAPABILITY OF INTERLAYER MATERIAL
J. XU, Y. B. LI, X. CHEN, D. Y. GE, B. H. LIU, M. Y. ZHU, T. H. PARK
Int J Automot Technol. 2011;12(5):687-695.    DOI: https://doi.org/10.1007/s12239-011-0080-2
         Cited By 23
 Automobile Body and Safety
697 MODEL-BASED ANALYSIS OF THE MECHANICAL SUBSYSTEM OF AN AIR BRAKE SYSTEM
D. B. SONAWANE, K. NARAYAN, V. S. RAO, S. C. SUBRAMANIAN
Int J Automot Technol. 2011;12(5):697-704.    DOI: https://doi.org/10.1007/s12239-011-0081-1
         Cited By 7
 Materials and Recycling, Manufacturing
705 OPTIMIZATION OF DRYING PERFORMANCE CONSIDERING DRIVING CONDITIONS
Wonki Park, Sang-Don Mun, Hi-Koan Lee, Gyun Eui Yang
Int J Automot Technol. 2011;12(5):705-712.    DOI: https://doi.org/10.1007/s12239-011-0082-0
         Cited By 2
 Materials and Recycling, Manufacturing
713 FATIGUE LIFE RELIABILITY PREDICTION OF A STUB AXLE USING MONTE CARLO SIMULATION
Y. M. ASRI, E. A. AZRULHISHAM, A. W. DZURAIDAH, A. SHAHRIR, A. SHAHRUM, Z. AZAMI
Int J Automot Technol. 2011;12(5):713-719.    DOI: https://doi.org/10.1007/s12239-011-0083-z
         Cited By 10
 Fuels and Lubricants
721 COMPUTATIONAL STUDY OF CHARGE STRATIFICATION IN EARLY-INJECTION SCCI ENGINES UNDER LIGHT-LOAD CONDITIONS
J. ABRAHAM
Int J Automot Technol. 2011;12(5):721-732.    DOI: https://doi.org/10.1007/s12239-011-0084-y
         Cited By 6
 Automobile Electronics
733 DEVELOPMENT OF A HARDWARE IN THE LOOP SIMULATION SYSTEM FOR ELECTRIC POWER STEERING IN VEHICLES
Lee Man Hyung, H. M. LEE, Kil Soo Lee, S. K. HA, J. I. BAE, J. H. PARK, H. G. PARK, H. J. CHOI, H. H. CHUN
Int J Automot Technol. 2011;12(5):733-744.    DOI: https://doi.org/10.1007/s12239-011-0085-x
         Cited By 29
 Intelligent Vehicle / Transportation Systems
745 FUZZY EXPERT SYSTEM FOR CONTROLLING SWAMP TERRAIN INTELLIGENT AIR-CUSHION TRACKED VEHICLE
A. HOSSAIN, A. RAHMAN, A. K. M. MOHIUDDIN
Int J Automot Technol. 2011;12(5):745-753.    DOI: https://doi.org/10.1007/s12239-011-0086-9
         Cited By 10
 Intelligent Vehicle / Transportation Systems
755 DEVELOPMENT OF A TELEMATICS EVALUATION ENVIRONMENT BASED ON A DRIVING SIMULATOR AND ITS APPLICATION
Moonsik Kim, Si-bok Yu, Sooyoung Lee, Min Cheol Lee
Int J Automot Technol. 2011;12(5):755-762.    DOI: https://doi.org/10.1007/s12239-011-0087-8
         Cited By 2
 Fuel Cell, Hybrid and Electrical Vehicle
763 TORQUE CONTROL OF ENGINE CLUTCH TO IMPROVE THE DRIVING QUALITY OF HYBRID ELECTRIC VEHICLES
Hyun-Soo Hwang, Dongho Yang, Hyeonki Choi, Hyunsoo Kim, Sung-Ho Hwang
Int J Automot Technol. 2011;12(5):763-768.    DOI: https://doi.org/10.1007/s12239-011-0088-7
         Cited By 22
 Other Fields of Automotive Engineering
769 VALIDITY AND LIMITATIONS OF THE KINEMATIC ROLL CENTER CONCEPT FROM THE VIEWPOINT OF SPATIAL KINEMATICS USING SCREW THEORY
Jaekil Lee, Jae Kyung Shim
Int J Automot Technol. 2011;12(5):769-775.    DOI: https://doi.org/10.1007/s12239-011-0089-6
         Cited By 2
 Other Fields of Automotive Engineering
777 VEHICLE INTERIOR NOISE MODEL BASED ON A POWER LAW
HYUNGSEOK KOOK, D. LEE, Kang Duck Ih
Int J Automot Technol. 2011;12(5):777-785.    DOI: https://doi.org/10.1007/s12239-011-0090-0
         Cited By 5
Editorial Office
21 Teheran-ro 52-gil, Gangnam-gu, Seoul 06212, Korea
TEL: +82-2-564-3971   FAX: +82-2-564-3973   E-mail: manage@ksae.org
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Society of Automotive Engineers.                 Developed in M2PI
Close layer
prev next