|
|
|
Engine, Emission Technology |
|
721 |
EFFECTS OF ARGON DILUTION ON THE THERMAL EFFICIENCY AND EXHAUST EMISSIONS OF A NG ENGINE
W. F. LI, Z. C. LIU, J. TIAN, Z. S. WANG, Y. XU
Int J Automot Technol. 2015;16(5):721-731. DOI: https://doi.org/10.1007/s12239-015-0073-7
 
|
Cited By 16 |
|
|
|
|
|
Engine, Emission Technology |
|
733 |
CONTROL OF A DUAL-LOOP EXHAUST GAS RECIRCULATION SYSTEM FOR A TURBOCHARGED DIESEL ENGINE
S. CHEN, F. YAN
Int J Automot Technol. 2015;16(5):733-738. DOI: https://doi.org/10.1007/s12239-015-0074-6
|
|
Cited By 7 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
739 |
FIELD OPERATIONAL TEST OF ADVANCED DRIVER ASSISTANCE SYSTEMS IN TYPICAL CHINESE ROAD CONDITIONS: THE INFLUENCE OF DRIVER GENDER, AGE AND AGGRESSION
G. LI, S. EBEN LI, B. CHENG
Int J Automot Technol. 2015;16(5):739-750. DOI: https://doi.org/10.1007/s12239-015-0075-5
|
|
Cited By 67 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
751 |
VEHICLE AND STEERING SYSTEM DYNAMICS IN THE CONTEXT OF ON-CENTRE HANDLING
K. T. R. VAN ENDE, F. KÜÇÜKAY, R. HENZE, F. K. KALLMEYER, J. HOFFMANN
Int J Automot Technol. 2015;16(5):751-763. DOI: https://doi.org/10.1007/s12239-015-0076-4
|
|
Cited By 11 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
765 |
DEVELOPMENT OF A CONTROL METHOD FOR AN ELECTROMAGNETIC SEMI-ACTIVE SUSPENSION RECLAIMING ENERGY WITH VARYING CHARGE VOLTAGE IN STEPS
S. A. CHEN, X. LI, L. J. ZHAO, Y. X. WANG, Y. B. KIM
Int J Automot Technol. 2015;16(5):765-773. DOI: https://doi.org/10.1007/s12239-015-0077-3
|
|
Cited By 25 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
775 |
UNIFIED CHASSIS CONTROL WITH ELECTRONIC STABILITY CONTROL AND ACTIVE FRONT STEERING FOR UNDER-STEER PREVENTION
S. J. YIM
Int J Automot Technol. 2015;16(5):775-782. DOI: https://doi.org/10.1007/s12239-015-0078-2
|
|
Cited By 27 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
783 |
JERK PHENOMENON OF THE HYDROSTATIC TRANSMISSION THROUGH THE EXPERIMENT AND ANALYSIS
D. M. KIM, S. C. KIM, D. K. NOH, J. S. JANG
Int J Automot Technol. 2015;16(5):783-790. DOI: https://doi.org/10.1007/s12239-015-0079-1
|
|
Cited By 10 |
|
|
|
|
|
Automobile Body and Safety |
|
791 |
METHOD FOR INVESTIGATION OF CHILD OCCUPANT IMPACT DYNAMICS BASED ON REAL-WORLD ACCIDENT
Y. PENG, R. LI, G. B. LI, X. M. YANG, D. ZHOU
Int J Automot Technol. 2015;16(5):791-797. DOI: https://doi.org/10.1007/s12239-015-0080-8
|
|
Cited By 7 |
|
|
|
|
|
Automobile Body and Safety |
|
799 |
ANALYSIS OF VEHICLE STRUCTURAL PERFORMANCE DURING SMALL-OVERLAP FRONTAL IMPACT
P. T. L. NGUYEN, J. Y. LEE, H. J. YIM, S. B. LEE, S. J. HEO
Int J Automot Technol. 2015;16(5):799-805. DOI: https://doi.org/10.1007/s12239-015-0081-7
|
|
Cited By 29 |
|
|
|
|
|
Fuels and Lubricants |
|
807 |
DEVELOPMENT OF A DIESEL COLD PERFORMANCE EVALUATION METHOD BY USE OF DESIGN OF EXPERIMENT
J.-H. LEE, Y.-Z. LEE
Int J Automot Technol. 2015;16(5):807-812. DOI: https://doi.org/10.1007/s12239-015-0082-6
|
|
Cited By 4 |
|
|
|
|
|
Automobile Electronics |
|
813 |
ANALYSIS OF PARALLEL PROCESSING EFFECTS THROUGH A CO-PROCESSOR IN DIESEL ENGINE MANAGEMENT SYSTEM
J. SOHN, S. HONG, I. PARK, J. KWON, W. LEE, M. SUNWOO
Int J Automot Technol. 2015;16(5):813-820. DOI: https://doi.org/10.1007/s12239-015-0083-5
|
|
|
|
|
Automobile Electronics |
|
821 |
OPTIMIZATION OF THE MOUNTING POSITION AND ANGLE FOR RKE ANTENNAS
D. E. LEE, G. BYUN, H. S. CHOO
Int J Automot Technol. 2015;16(5):821-825. DOI: https://doi.org/10.1007/s12239-015-0084-4
|
|
Cited By 1 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
827 |
OPTIMIZING THE PERFORMANCE OF VEHICLE-TO-GRID (V2G) ENABLED BATTERY ELECTRIC VEHICLES THROUGH A SMART CHARGE SCHEDULING MODEL
Z. LI, M. CHOWDHURY, P. BHAVSAR, Y. HE
Int J Automot Technol. 2015;16(5):827-837. DOI: https://doi.org/10.1007/s12239-015-0085-3
|
|
Cited By 38 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
839 |
ROBUST CONTROL FOR FOUR WHEEL INDEPENDENTLY-ACTUATED ELECTRIC GROUND VEHICLES BY EXTERNAL YAW-MOMENT GENERATION
G. YIN, R. WANG, J. WANG
Int J Automot Technol. 2015;16(5):839-847. DOI: https://doi.org/10.1007/s12239-015-0086-2
|
|
Cited By 45 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
849 |
FRICTIONAL CHARACTERISTICS OF STEEL SHEETS USED IN AUTOMOTIVE INDUSTRY
T. TRZEPIECI SKI, A. BAZAN, H. G. LEMU
Int J Automot Technol. 2015;16(5):849-863. DOI: https://doi.org/10.1007/s12239-015-0087-1
|
|
Cited By 34 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
865 |
DEVELOPMENT OF A TIRE MODEL BASED ON AN ANALYSIS OF TIRE STRAIN OBTAINED BY AN INTELLIGENT TIRE SYSTEM
S. J. KIM, K.-S. KIM, Y.-S. YOON
Int J Automot Technol. 2015;16(5):865-875. DOI: https://doi.org/10.1007/s12239-015-0088-0
|
|
Cited By 32 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
877 |
QUASI-DIMENSIONAL ANALYSIS OF COMBUSTION, EMISSIONS AND KNOCKING IN A HOMOGENEOUS GDI ENGINE
J. LEE, Y. LEE, K. Y. HUH, H. KWON, J. I. PARK
Int J Automot Technol. 2015;16(5):877-883. DOI: https://doi.org/10.1007/s12239-015-0089-z
|
|
Cited By 3 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
885 |
OPTIMAL PARTITION LAYOUT OF EXPANSION CHAMBER MUFFLER WITH OFFSET INLET/OUTLET
G. W. JANG, J. W. LEE
Int J Automot Technol. 2015;16(5):885-893. DOI: https://doi.org/10.1007/s12239-015-0090-6
|
|
Cited By 10 |
|
|
|
|
> Previous issue
