Home | KSAE | E-Submission | Sitemap | Contact Us
top_img
Previous issue > Previous issue



Table of Contents | April, 2007  Vol. 8   No.2 Previous Issue | Next Issue | Archive
Articles
 Engine, Emission Technology
127 EXPERIMENTAL STUDY ON THE FLOW AND MIXTURE DISTIBUTION IN A VISUALIZATION ENGINE USING DIGITAL PARTICLE IMAGE VELOCIMETRY AND ENTROPY ANALYSIS
K. H. LEE, C. H. LEE
Int J Automot Technol. 2007;8(2):127-135.
      
 
137 ANALYSIS OF HCCI COMBUSTION CHARACTERISTICS BASED ON EXPERIMENTATION AND SIMULATIONS-INFLUENCE OF FUEL OCTANE NUMBER AND INTERNAL EGR ON COMBUSTION
A. IIJIMA, K. YOSHIDA, H. SHOJI, J. T. LEE
Int J Automot Technol. 2007;8(2):137-147.
      
 
149 NUMERICAL ANALYSIS OF A SAMPLING MODULE FOR A FAST RESPONSE EXHAUST GAS ANALYZER
W. S. KIM, J. H. LEE, J. S. YOO, B. O. RHEE, J. I. PARK
Int J Automot Technol. 2007;8(2):149-154.
      
 
155 INVESTIGATION OF SHORT INJECTIONS USING STANDARD AND MODIFIED COMMON RAIL INJECTORS
A. FICARELLA, A. GIUFFRIDA, R. LANZAFAME
Int J Automot Technol. 2007;8(2):155-163.
      
 
165 DETAILED EXAMINATION OF INVERSE-ANALYSIS PARAMETERS FOR PARTICLE TRAPPING IN SINGLE CHANNEL DIESEL PARTICULATE FILTER
S.-C. JUNG, J.-S. PARK, W.-S. YOON
Int J Automot Technol. 2007;8(2):165-177.
      
 Alternative Energy & Vehicle
179 CHARACTERISTICS OF PERFORMANCE AND EXHAUST EMISSION OF DIESEL ENGINES BY CHANGES IN FUEL PROPERTIES AND APPLICATION OF EGR
S. H. CHOI, Y. T. OH
Int J Automot Technol. 2007;8(2):179-184.
      
 Automobile Body and Safety
185 INJURY PERFORMANCE EVALUATION OF THE CHILD RESTRAINT SYSTEMS
Y. J. SHIN, H. KIM, S. B. KIM, H. Y. KIM
Int J Automot Technol. 2007;8(2):185-191.
      
 
193 NUMERICAL SIMULATION OF CONVEX AND CONCAVE TUBES WITH CONSIDERATION OF STRAIN RATE SENSITIVITY
B.-W. YE, S. OH, Y.-B. CHO, H.-C. SIN
Int J Automot Technol. 2007;8(2):193-201.
      
 Automobile Chassis & Vehicle Dynamic
203 DEVELOPMENT OF HARDWARE-IN-THE-LOOP SIMULATION SYSTEM AS A TESTBENCH FOR ESP UNIT
S. J. LEE, K. PARK, T. H. HWANG, J. H. HWANG, Y. C. JUNG, Y. J. KIM
Int J Automot Technol. 2007;8(2):203-209.
      
 
211 MAXIMUM BRAKING FORCE CONTROL UTILIZING THE ESTIMATED BRAKING FORCE
D. HONG, I. HWANG, M. SUNWOO, K. HUH
Int J Automot Technol. 2007;8(2):211-217.
      
 Materials and Recycling, Manufacturing
219 EFFECT OF THE DIFFERENTIAL PRESSURE BY THE BLOW-BY GAS FLOW ON THE PCV VALVE WITH A CRACK
S.-M. SONG, O.-H. KWON, Y.-W. LEE
Int J Automot Technol. 2007;8(2):219-224.
      
 Other Fields of Automotive Engineering
225 MODELING TRANSMISSION ERRORS OF GEAR PAIRS WITH MODIFIED TEETH FOR AUTOMOTIVE TRANSMISSIONS
H. W. LEE, M. W. PARK, S. H. JOO, N. G. PARK, M. H. BAE
Int J Automot Technol. 2007;8(2):225-232.
      
 
233 MODELING AND PARAMETER IDENTIFICATION FOR A PASSIVE HYDRAULIC MOUNT
Y. X. ZHANG, J. W. ZHANG, W.-B. SHANGGUAN, Q. SH. FENG
Int J Automot Technol. 2007;8(2):233-241.
      
 
243 DURABILITY IMPROVEMENT OF A CYLINDER HEAD IN CONSIDERATION OF MANUFACTURING PROCESS
B. KIM, H. CHANG, K. LEE, C. KIM
Int J Automot Technol. 2007;8(2):243-248.
      
 Automobile Electronics
249 RESISTANCE ESTIMATION OF A PWM-DRIVEN SOLENOID
H. G. JUNG, J. Y. HWANG, P. J. YOON, J. H. KIM
Int J Automot Technol. 2007;8(2):249-258.
      
Editorial Office
21 Teheran-ro 52-gil, Gangnam-gu, Seoul 06212, Korea
TEL: +82-2-564-3971/2   FAX: +82-2-564-3973   E-mail: car@ksae.org
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Society of Automotive Engineers. All rights reserved.                 Developed in M2community
Close layer
prev next