| Home | KSAE | E-Submission | Sitemap | Contact Us |  
International Journal of Automotive Technology > Volume 16(3); 2015 > Article
International Journal of Automotive Technology 2015;16(3): 417-426.
doi: https://doi.org/10.1007/s12239-015-0043-0
B. WANG1, Z. J. LU1, X. B. CHEN1, P. WANG2
1Tongji University
2Yancheng Institute of Technology
To analyze and model the dynamic efficiency of vehicle transmission system, the theoretical power losses formulas of the spur/helical gear under the condition of elastohydrodynamic lubrication (EHL) were deduced. The spur gear meshing efficiency model was validated by comparing the predicted models with measured data. The formulas of oil churning, windage, and bearing power losses, which are widely applied and fit the experimental results well, were employed to analyze the efficiency of manual transmission system. In terms of formulas of power losses of each part in the transmission, the dynamic transmission efficiency model of manual transmission/reducer based on Matlab/Simulink was established. The efficiency map of each shift of a specific five-speed manual transmission was simulated under new European Driving Cycle (NEDC). Finally, in terms of simulation results, a new type gearbox was proposed and analyzed, which is capable of improving transmission efficiency significantly.
Key Words: Gear meshing power losses, Oil churning and windage, Dynamic transmission efficiency, Modeling
Editorial Office
21 Teheran-ro 52-gil, Gangnam-gu, Seoul 06212, Korea
TEL: +82-2-564-3971   FAX: +82-2-564-3973   E-mail: manage@ksae.org
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Society of Automotive Engineers.                 Developed in M2PI
Close layer
prev next