| Home | KSAE | E-Submission | Sitemap | Contact Us |  
top_img
International Journal of Automotive Technology > Volume 11(3); 2010 > Article
International Journal of Automotive Technology 2010;11(3): 289-306.
doi: https://doi.org/10.1007/s12239-010-0037-x
NUMERICAL INVESTIGATION OF TURBOLAG REDUCTION IN HD CNG ENGINES BY MEANS OF EXHAUST VALVE VARIABLE ACTUATION AND SPARK TIMING CONTRO
M. BARATTA1, E. SPESSA1, P. MAIRONE2
1Politecnico di Torino
2Centro Ricerche Fiat
ABSTRACT
Turbocharging port-injected Natural Gas (NG) engines allows them to recover gaseous-fuel related power gap with respect to gasoline engines. However, turbolag reduction is necessary to achieve high performance during engine transient operations and to improve vehicle fun-to-drive characteristics. Significant support for the study of turbocharged Compressed Natural Gas (CNG) engines and guidelines for the turbo-matching process can be provided by 1-D numerical simulation tools. However, 1-D models are predictive only when a careful tuning procedure is set-up and carried out on the basis of the experimental data. In this paper, a 1-D model of a Heavy-Duty (HD) turbocharged CNG engine was set up in the GT-POWER (Gamma Technologies Inc., Westmont, IL, US) environment to simulate transient operations and to evaluate the turbolag. An extensive experimental activity was carried out to provide experimental data for model tuning. The model buildup and tuning processes are described in detail with specific reference to the turbocharger model, whose correct calibration is a key factor in accounting for the effects of turbine flow pulsations. The second part of the paper focuses on the evaluation of different strategies for turbolag reduction, namely, exhaust valve variable actuation and spark timing control. Such strategies were aimed at increasing the engine exhaust-gas power transferred to the turbine, thus reducing the time required to accelerate the turbocharger group. The effects of these strategies were examined for tip-in maneuvers at a fixed engine speed. Depending on the engine speed and the applied turbolag reduction strategy, turbolag reductions from 70% to 10% were achieved.
Key Words: Turbocharging, Turbolag, 1-D simulation
Editorial Office
21 Teheran-ro 52-gil, Gangnam-gu, Seoul 06212, Korea
TEL: +82-2-564-3971   FAX: +82-2-564-3973   E-mail: manage@ksae.org
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Society of Automotive Engineers.                 Developed in M2PI
Close layer
prev next