|
Fuels and Lubricants |
|
|
EFFECT OF NOZZLE ORIFICE DIAMETER ON DIESEL SPRAY TIP PENETRATION ACCORDING TO VARIOUS SPRAY MODELS FOR CFD SIMULATION WITH WIDELY VARYING BACK PRESSURE
C. H. LEE
Int J Automot Technol. 2017;18(2):317-325. DOI: https://doi.org/10.1007/s12239-017-0032-6
 
|
Cited By 9 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
VIBRATION REDUCTION OF H/SHAFT USING AN ELECTROMAGNETIC DAMPER WITH MODE CHANGE
K. H. LEE, J. H. BAK, J.-L. PARK, C.-H. LEE
Int J Automot Technol. 2017;18(2):255-261. DOI: https://doi.org/10.1007/s12239-017-0025-5
|
|
Cited By 11 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
|
DESIGN AND DEVELOPMENT OF AUTOMOTIVE BLIND SPOT DETECTION RADAR SYSTEM BASED ON ROI PRE-PROCESSING SCHEME
E. HYUN, Y. S. JIN, J. H. LEE
Int J Automot Technol. 2017;18(1):165-177. DOI: https://doi.org/10.1007/s12239-017-0017-5
|
|
Cited By 26 |
|
|
|
|
|
Automobile Body and Safety |
|
|
CRASHWORTHINESS OF CHROMIUM PLATED PLASTIC RADIATOR GRILLE
S. H. YOO, N. T. JEONG, K. S. KIM, S. M. YANG, J. H. LEE, S. H. CHOI, M. W. SUH
Int J Automot Technol. 2016;17(4):681-687. DOI: https://doi.org/10.1007/s12239-016-0067-0
|
|
|
|
|
Automobile Body and Safety |
|
|
LOOSENING ANALYSIS FOR FASTENING SCREW OF AUTOMOTIVE DOOR TRIM PARTS
S. M. YANG, S. H. YOO, D. S. GI, S. B. CHOI, K. S. KIM, N. T. JEONG, S. U. CHOI, M. W. SUH, J. H. LEE
Int J Automot Technol. 2016;17(4):671-679. DOI: https://doi.org/10.1007/s12239-016-0066-1
|
|
Cited By 7 |
|
|
|
|
|
Engine, Emission Technology |
|
|
ANALYSIS OF VEHICLE FUEL EFFICIENCY AND SURVIVAL PATTERNS FOR THE PREDICTION OF TOTAL ENERGY CONSUMPTION FROM GROUND TRANSPORTATION IN KOREA
H. LEE, H. CHOI
Int J Automot Technol. 2016;17(4):605-616. DOI: https://doi.org/10.1007/s12239-016-0060-7
|
|
Cited By 5 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
|
DROWSY BEHAVIOR DETECTION BASED ON DRIVING INFORMATION
M. S. WANG, N. T. JEONG, K. S. KIM, S. B. CHOI, S. M. YANG, S. H. YOU, J. H. LEE, M. W. SUH
Int J Automot Technol. 2016;17(1):165-173. DOI: https://doi.org/10.1007/s12239-016-0016-y
|
|
Cited By 45 |
|
|
|
|
|
Automobile Body and Safety |
|
|
CLAMPING PERFORMANCE OF FASTENER IN WINDSHIELD WIPER ASSEMBLY USING THEORETICAL AND EXPERIMENTAL METHODS
J. H. CHUNG, K. H. LEE, C.-H. LEE, N. K. KONG
Int J Automot Technol. 2016;17(1):99-107. DOI: https://doi.org/10.1007/s12239-016-0009-x
|
|
Cited By 1 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
VEHICLE SIDESLIP ESTIMATION AND COMPENSATION FOR BANKED ROAD
S. CHUNG, H. LEE
Int J Automot Technol. 2016;17(1):63-69. DOI: https://doi.org/10.1007/s12239-016-0005-1
|
|
Cited By 11 |
|
|
|
|
|
Engine, Emission Technology |
|
|
COMBUSTION AND EMISSION CHARACTERISTICS OF WOOD PYROLYSIS OIL-BUTANOL BLENDED FUELS IN A DI DIESEL ENGINE
T. Y. KIM, S. H. LEE
Int J Automot Technol. 2015;16(6):903-912. DOI: https://doi.org/10.1007/s12239-015-0092-4
|
|
Cited By 41 |
|
|
|
|
|
Fuels and Lubricants |
|
|
DEVELOPMENT OF A DIESEL COLD PERFORMANCE EVALUATION METHOD BY USE OF DESIGN OF EXPERIMENT
J.-H. LEE, Y.-Z. LEE
Int J Automot Technol. 2015;16(5):807-812. DOI: https://doi.org/10.1007/s12239-015-0082-6
|
|
Cited By 5 |
|
|
|
|
|
Engine, Emission Technology |
|
|
ON-ROAD CHASING AND LABORATORY MEASUREMENTS OF EXHAUST PARTICLE EMISSIONS OF DIESEL VEHICLES EQUIPPED WITH AFTERTREATMENT TECHNOLOGIES (DPF, UREA-SCR)
S. H. LEE, J. H. KWAK, S. Y. LEE, J. H. LEE
Int J Automot Technol. 2015;16(4):551-559. DOI: https://doi.org/10.1007/s12239-015-0056-8
|
|
Cited By 37 |
|
|
|
|
|
Fuels and Lubricants |
|
|
DIESEL COLD FLOW EVALUATION USING DESIGN OF EXPERIMENT
J.-H. LEE, Y.-Z. LEE
Int J Automot Technol. 2015;16(3):471-478. DOI: https://doi.org/10.1007/s12239-015-0049-7
|
|
Cited By 4 |
|
|
|
|
|
Engine, Emission Technology |
|
|
DEVELOPMENT OF A NEW EVALUATING METHOD FOR DECIDING A REPRESENTATIVE SMOKE EMISSION OF DIESEL VEHICLE DRIVEN WITH KD147 MODE
K. Y. PARK, C. H. LEE
Int J Automot Technol. 2015;16(3):379-386. DOI: https://doi.org/10.1007/s12239-015-0039-9
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
|
LIFE ESTIMATION OF HOT PRESS FORMING DIE BY USING INTERFACE HEAT TRANSFER COEFFICIENT OBTAINED FROM INVERSE ANALYSIS
D. Y. KIM, H. Y. KIM, S. H. LEE, H. K. KIM
Int J Automot Technol. 2015;16(2):285-292. DOI: https://doi.org/10.1007/s12239-015-0030-5
|
|
Cited By 4 |
|
|
|
|
|
Engine, Emission Technology |
|
|
INVESTIGATION ON THE FLAME CHARACTERISTICS IN A PCCI ENGINE USING ENDOSCOPE SYSTEM WITH MICRO-CASSEGRAIN
H. I. KIM, Y. J. KIM, K. H. LEE, H. Y. JEONG, Y. IKEDA
Int J Automot Technol. 2014;15(7):1063-1070. DOI: https://doi.org/10.1007/s12239-014-0110-y
|
|
Cited By 6 |
|
|
|
|
|
Automobile Body and Safety |
|
|
ROBUST DESIGN OPTIMIZATION OF FRONTAL STRUCTURES FOR MINIMIZING INJURY RISKS OF FLEX PEDESTRIAN LEGFORM IMPACTOR
Y. H. LEE, Y. J. JOO, J. S. PARK, Y. S. KIM, H. J. YIM
Int J Automot Technol. 2014;15(5):757-764. DOI: https://doi.org/10.1007/s12239-014-0079-6
|
|
Cited By 15 |
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
|
HIGH SPEED DRIVING STABILITY OF PASSENGER CAR UNDER CROSSWIND EFFECTS
J. D. KEE, J. H. RHO, K. H. KIM, D. H. LEE
Int J Automot Technol. 2014;15(5):741-747. DOI: https://doi.org/10.1007/s12239-014-0077-8
|
|
Cited By 28 |
|
|
|
|
|
Engine, Emission Technology |
|
|
ANALYSIS OF THE EFFECT OF COLD START ON FUEL ECONOMY OF GASOLINE AUTOMATIC TRANSMISSION VEHICLE
Y. K. LEE, J. I. PARK, J. H. LEE
Int J Automot Technol. 2014;15(5):709-714. DOI: https://doi.org/10.1007/s12239-014-0073-z
|
|
Cited By 5 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
|
EMPIRICAL ANALYSIS ON THE EFFECT OF DESIGN VARIABLES OF AUTOMOTIVE SEAT LUMBAR SUPPORT ON THE INITIAL SITTING DISCOMFORT
J. T. YANG, H. Y. CHOI, J. H. LEE, S. U. LEE
Int J Automot Technol. 2014;15(4):667-672. DOI: https://doi.org/10.1007/s12239-014-0069-8
|
|
Cited By 4 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
|
REALIZATION OF PMP-BASED CONTROL FOR HYBRID ELECTRIC VEHICLES IN A BACKWARD-LOOKING SIMULATION
N. W. KIM, D. H. LEE, C. ZHENG, C. SHIN, H. SEO, S. W. CHA
Int J Automot Technol. 2014;15(4):625-635. DOI: https://doi.org/10.1007/s12239-014-0065-z
|
|
Cited By 69 |
|
|
|
|
|
Engine, Emission Technology |
|
|
ON-ROAD CHASING MEASUREMENT OF EXHAUST PARTICLE EMISSIONS FROM DIESEL, CNG, LPG, AND DME-FUELED VEHICLES USING A MOBILE EMISSION LABORATORY
J. H. KWAK, H. S. KIM, J. H. LEE, S. H. LEE
Int J Automot Technol. 2014;15(4):543-551. DOI: https://doi.org/10.1007/s12239-014-0057-z
|
|
Cited By 38 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
PREVIEW SUSPENSION CONTROL FOR A FULL TRACKED VEHICLE
I. YOUN, R. TCHAMNA, S. H. LEE, N. UDDIN, S. K. LYU, M. TOMIZUKA
Int J Automot Technol. 2014;15(3):399-410. DOI: https://doi.org/10.1007/s12239-014-0042-6
|
|
Cited By 18 |
|
|
|
|
|
Engine, Emission Technology |
|
|
NONLINEAR SLIDING MODE OBSERVER FOR EXHAUST MANIFOLD PRESSURE ESTIMATION IN A LIGHT-DUTY DIESEL ENGINE
J. H. LEE, H. J. LEE, M. SUNWOO
Int J Automot Technol. 2014;15(3):377-386. DOI: https://doi.org/10.1007/s12239-014-0040-8
|
|
Cited By 10 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
|
DEVELOPMENT OF AN AUTONOMOUS BRAKING SYSTEM USING THE PREDICTED STOPPING DISTANCE
D. H. LEE, S. K. KIM, C. S. KIM, K. S. HUH
Int J Automot Technol. 2014;15(2):341-346. DOI: https://doi.org/10.1007/s12239-014-0035-5
|
|
Cited By 34 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
HOT JUDDER SIMULATION OF A VENTILATED DISC AND DESIGN OF AN IMPROVED DISC USING SENSITIVITY ANALYSIS
J. H. PARK, Tae Won Park, J. H. LEE, M. H. CHO
Int J Automot Technol. 2014;15(1):1-6. DOI: https://doi.org/10.1007/s12239-014-0001-2
|
|
Cited By 6 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
ROBUST DESIGN OPTIMIZATION OF SUSPENSION SYSTEM CONSIDERING STEERING PULL REDUCTION
K. PARK, S. J. HEO, D. O. KANG, J. I. JEONG, J. H. YI, J. H. LEE, K. W. KIM
Int J Automot Technol. 2013;14(6):927-933. DOI: https://doi.org/10.1007/s12239-013-0102-3
|
|
Cited By 16 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
|
SHAPE OPTIMIZATION OF LOWER CONTROL ARM CONSIDERING MULTI-DISCIPLINARY CONSTRAINT CONDITION BY USING PROGRESS META-MODEL METHOD
S. J. HEO, D. O. KANG, J. H. LEE, I. H. KIM, S. M. H. DARWISH
Int J Automot Technol. 2013;14(3):499-505. DOI: https://doi.org/10.1007/s12239-013-0054-7
|
|
Cited By 23 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
|
COMPONENT SIZING AND ENGINE OPTIMAL OPERATION LINE ANALYSIS FOR A PLUG-IN HYBRID ELECTRIC TRANSIT BUS
D. H. LEE, N. W. KIM, J. R. JEONG, Y. I. PARK, S. W. CHA
Int J Automot Technol. 2013;14(3):459-469. DOI: https://doi.org/10.1007/s12239-013-0050-y
|
|
Cited By 32 |
|
|
|
|
|
Automobile Body and Safety |
|
|
PILOT STUDY ON CONSTRUCTING A REAL-WORLD, IN-DEPTH DATABASE OF OCCUPANT INJURY AND VEHICLE DAMAGE AFTER A DOMESTIC MOTOR VEHICLE CRASH ACCIDENT
S. C. KIM, K. H. LEE, H. Y. CHOI, B. W. KIM, H. S. JUNG
Int J Automot Technol. 2013;14(3):407-413. DOI: https://doi.org/10.1007/s12239-013-0044-9
|
|
|
|
> Browse Articles > Search
