|
Heat Transfer, Fluid and Thermal Engineering |
|
|
GRILLE DESIGN FOR PASSENGER CAR TO IMPROVE AERODYNAMIC AND COOLING PERFORMANCE USING CFD TECHNIQUE
J. M. KIM, K. M. KIM, S. J. HA, M. S. KIM
Int J Automot Technol. 2016;17(6):967-976. DOI: https://doi.org/10.1007/s12239-016-0094-x
 
|
Cited By 18 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
|
HARDWARE-IN-THE-LOOP SIMULATION TO EVALUATE THE DRIVE PERFORMANCE OF THE ELECTRIC TWO-WHEELERS ON A MOTOR DYNAMOMETER
D. K. KANG, M. S. KIM
Int J Automot Technol. 2015;16(6):1031-1040. DOI: https://doi.org/10.1007/s12239-015-0105-3
|
|
Cited By 11 |
|
|
|
|
|
Engine, Emission Technology |
|
|
COMPARISON STUDY ON CHARACTERISTICS OF NANO-SIZED PARTICLE NUMBER DISTRIBUTION BY USING CONDENSATION PARTICLE COUNTER CALIBRATED WITH SPRAY AND SOOT TYPE PARTICLE GENERATION METHODS
M. C. CHUNG, M. S. KIM, G. S. SUNG, S. M. KIM, J. W. LEE
Int J Automot Technol. 2014;15(6):877-884. DOI: https://doi.org/10.1007/s12239-014-0092-9
|
|
Cited By 1 |
|
|
|
|
|
Automobile Body and Safety |
|
|
INNOVATIVE DESIGN OPTIMIZATION STRATEGY FOR THE AUTOMOTIVE INDUSTRY
M. S. KIM, D. O. KANG, S. J. HEO
Int J Automot Technol. 2014;15(2):291-301. DOI: https://doi.org/10.1007/s12239-014-0030-x
|
|
Cited By 20 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
ROBUST DESIGN OPTIMIZATION OF THE DYNAMIC RESPONSES OF A TRACKED VEHICLE SYSTEM
M. S. KIM, Y. H. WOO
Int J Automot Technol. 2013;14(1):47-51. DOI: https://doi.org/10.1007/s12239-013-0006-2
|
|
Cited By 7 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
|
EXPERIMENTAL STUDIES ON THE HEATING PERFORMANCE OF THE PTC HEATER AND HEAT PUMP COMBINED SYSTEM IN FUEL CELLS AND ELECTRIC VEHICLES
K. Y. KIM, S. C. KIM, M. S. KIM
Int J Automot Technol. 2012;13(6):971-977. DOI: https://doi.org/10.1007/s12239-012-0099-z
|
|
Cited By 57 |
|
|
|
|
|
Engine, Emission Technology |
|
|
COOLING PERFORMANCE EVALUATION OF HEIGHT-DOWNSIZED FRONT END MODULE FOR PEDESTRIAN PROTECTION
S. C. KIM, M. S. KIM
Int J Automot Technol. 2012;13(4):533-539. DOI: https://doi.org/10.1007/s12239-012-0051-2
|
|
Cited By 1 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
|
PREDICTION OF THE DIMENSIONAL DEFORMATION OF THE ADDENDUM AND DEDENDUM AFTER THE WARM SHRINK FITTING PROCESS USING A CORRECTION COEFFICIENT
J. H. BAE, J. S. KIM, B. C. HWANG, W. B. BAE, M. S. KIM, C. KIM
Int J Automot Technol. 2012;13(2):285-291. DOI: https://doi.org/10.1007/s12239-012-0026-3
|
|
Cited By 11 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
ROBUST DESIGN OPTIMIZATION OF SUSPENSION SYSTEM BY USING TARGET CASCADING METHOD
Dae Oh Kang, Seung-Jin Heo, M. S. KIM, W. C. CHOI, I. H. KIM
Int J Automot Technol. 2012;13(1):109-122. DOI: https://doi.org/10.1007/s12239-012-0010-y
|
|
Cited By 23 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
METHOD TO OBJECTIVELY EVALUATE SUBJECTIVE RATINGS OF RIDE COMFORT
M. S. KIM, K. W. KIM, W. S. YOO
Int J Automot Technol. 2011;12(6):831-837. DOI: https://doi.org/10.1007/s12239-011-0095-8
|
|
Cited By 25 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
|
PERFORMANCE CHARACTERISTICS OF A SUPPLEMENTARY STACKCOOLING SYSTEM FOR FUEL-CELL VEHICLES USING A CARBON DIOXIDE AIR-CONDITIONING UNIT
S. C. KIM, J. C. PARK, M. S. KIM
Int J Automot Technol. 2010;11(6):893-900. DOI: https://doi.org/10.1007/s12239-010-0106-1
|
|
Cited By 12 |
|
|
|
|
|
Automobile Body and Safety |
|
|
OPTIMIZING THE SHAPE OF A BUMPER BEAM SECTION CONSIDERING PEDESTRIAN PROTECTION
D. K. PARK, C. D. JANG, S. B. LEE, S. J. HEO, H.J. YIM, M. S. KIM
Int J Automot Technol. 2010;11(4):489-494. DOI: https://doi.org/10.1007/s12239-010-0060-y
|
|
Cited By 26 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
|
PARTIAL RANGE SCALING METHOD BASED WASHOUT ALGORITHM FOR A VEHICLE DRIVING SIMULATOR AND ITS EVALUATION
M. S. KIM, Y. G. MOON, G. D. KIM, M. C. LEE
Int J Automot Technol. 2010;11(2):269-275. DOI: https://doi.org/10.1007/s12239-010-0034-0
|
|
Cited By 22 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
COMPARISON OF RIDE COMFORTS VIA EXPERIMENT AND COMPUTER SIMULATION
W.S. YOO, S. J. PARK, D. W. PARK, M. S. KIM, O. K. LIM, W. B. JEONG
Int J Automot Technol. 2006;7(3):309-314.
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
ALUMINUM SPACE FRAME B.I.W. OPTIMIZATION CONSIDERING MULTIDISCIPLINARY DESIGN CONSTRAINTS
B. J. KIM, M. S. KIM, S. J. HEO
Int J Automot Technol. 2005;6(6):635-641.
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
OPTIMUM AIR PRESSURE FOR AN AIR-CELL SEAT TO ENHANCE RIDE COMFORT
W. S. YOO, D. W. PARK, M. S. KIM, K. S. HONG
Int J Automot Technol. 2005;6(3):251-257.
|
|
|
|
> Browse Articles > Search
