|
|
|
Engine, Emission Technology |
|
315 |
EVALUATION OF IDLE STABILITY THROUGH IN-SITU TORQUE MEASUREMENT IN AUTOMATIC TRANSMISSION VEHICLES
Y. SHIM, S. K. KAUH, K.-P. HA
Int J Automot Technol. 2011;12(3):315-320. DOI: https://doi.org/10.1007/s12239-011-0037-5
 
|
Cited By 7 |
|
|
|
|
|
Engine, Emission Technology |
|
321 |
SLIDING-MODE OBSERVER FOR UREA-SELECTIVE CATALYTIC REDUCTION (SCR) MID-CATALYST AMMONIA CONCENTRATION ESTIMATION
M.-F. HSIEH, J. WANG
Int J Automot Technol. 2011;12(3):321-329. DOI: https://doi.org/10.1007/s12239-011-0038-4
|
|
Cited By 36 |
|
|
|
|
|
Engine, Emission Technology |
|
331 |
NANO-PARTICLE EMISSION CHARACTERISTICS OF EUROPEAN AND WORLDWIDE HARMONIZED TEST CYCLES FOR HEAVY-DUTY DIESEL ENGINES
C. L. MYUNG, J. KIM, S. KWON, K. CHOI, A. KO, S. PARK
Int J Automot Technol. 2011;12(3):331-337. DOI: https://doi.org/10.1007/s12239-011-0039-3
|
|
Cited By 11 |
|
|
|
|
|
Engine, Emission Technology |
|
339 |
EFFECTS OF SPLIT INJECTION, OXYGEN ENRICHED AIR AND HEAVY EGR ON SOOT EMISSIONS IN A DIESEL ENGINE
L. D. K. NGUYEN, N. W. SUNG, S. S. LEE, H. S. KIM
Int J Automot Technol. 2011;12(3):339-350. DOI: https://doi.org/10.1007/s12239-011-0040-x
|
|
Cited By 18 |
|
|
|
|
|
Engine, Emission Technology |
|
351 |
PISTON-TEMPERATURE MEASURING SYSTEM USING ELECTROMAGNETIC INDUCTION WITH VERIFICATION BY A TELEMETRY SYSTEM
H. H. LEE, H. W. BANG, S. K. KAUH, S. I. KIM
Int J Automot Technol. 2011;12(3):351-358. DOI: https://doi.org/10.1007/s12239-011-0041-9
|
|
Cited By 12 |
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
359 |
COMBINED EXPERIMENTAL AND MODELING METHODOLOGY FOR INTAKE LINE EVALUATION IN TURBOCHARGED DIESEL ENGINES
A. J. TORREGROSA, J. GALINDO, C. GUARDIOLA, O. VARNIER
Int J Automot Technol. 2011;12(3):359-367. DOI: https://doi.org/10.1007/s12239-011-0042-8
|
|
Cited By 9 |
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
369 |
DRAG REDUCTION OF A PICKUP TRUCK BY A REAR DOWNWARD FLAP
J. HA, S. JEONG, S. OBAYASHI
Int J Automot Technol. 2011;12(3):369-374. DOI: https://doi.org/10.1007/s12239-011-0043-7
|
|
Cited By 26 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
375 |
STRUCTURAL DESIGN OF AN OUTER TIE ROD FOR A PASSENGER CAR
J. K. KIM, Y. J. KIM, W. H. YANG, Y. C. PARK, K.-H. LEE
Int J Automot Technol. 2011;12(3):375-381. DOI: https://doi.org/10.1007/s12239-011-0044-6
|
|
Cited By 17 |
|
|
|
|
|
Automobile Body and Safety |
|
383 |
EFFECT OF PUNCH ANGLE ON ENERGY ABSORBING CHARACTERISTICS OF TUBE-TYPE CRASH ELEMENTS
W. M. CHOI, J. S. KIM, H. S. JUNG, T. S. KWON
Int J Automot Technol. 2011;12(3):383-389. DOI: https://doi.org/10.1007/s12239-011-0045-5
|
|
Cited By 21 |
|
|
|
|
|
Automobile Body and Safety |
|
391 |
DESIGN AND EVALUATION OF SIDESLIP ANGLE OBSERVER FOR VEHICLE STABILITY CONTROL
D. W. PI, N. CHEN, J. X. WANG, B. J. ZHANG
Int J Automot Technol. 2011;12(3):391-399. DOI: https://doi.org/10.1007/s12239-011-0046-4
|
|
Cited By 28 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
401 |
THERMO-OXIDATIVE DEGRADATION OF A CARBON BLACK COMPOUNDED EPDM RUBBER HOSE
S. B. KWAK, N. S. CHOI
Int J Automot Technol. 2011;12(3):401-408. DOI: https://doi.org/10.1007/s12239-011-0047-3
|
|
Cited By 17 |
|
|
|
|
|
Fuels and Lubricants |
|
409 |
ENGINE PERFORMANCE AND TOXIC GAS ANALYSIS OF BIOBUTANOL-BLENDED GASOLINE AS A VEHICLE FUEL
D. H. KIM, J.M. LEE, E. H. PARK, J. H. SONG, S. I. PARK
Int J Automot Technol. 2011;12(3):409-416. DOI: https://doi.org/10.1007/s12239-011-0048-2
|
|
Cited By 11 |
|
|
|
|
|
Automobile Electronics |
|
417 |
INVESTIGATION INTO THE DEVELOPMENT OF A BUS ELECTRICAL COOLING FAN SYSTEM
J.-H. KIM, J.-M. SEO, J. H.JUNG, H.-K. HUR
Int J Automot Technol. 2011;12(3):417-423. DOI: https://doi.org/10.1007/s12239-011-0049-1
|
|
Cited By 1 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
425 |
STEREOVISION-BASED REAL-TIME OCCUPANT CLASSIFICATION SYSTEM FOR ADVANCED AIRBAG SYSTEMS
S.-J. LEE, M.-S. JANG, Y.-G. KIM, G.-T. PARK
Int J Automot Technol. 2011;12(3):425-432. DOI: https://doi.org/10.1007/s12239-011-0050-8
|
|
Cited By 8 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
433 |
DESIGN METHODOLOGY OF HYBRID ELECTRIC VEHICLE ENERGY SOURCES: APPLICATION TO FUEL CELL VEHICLES
X. LIU, D. KIALLO, C. MARCHAND
Int J Automot Technol. 2011;12(3):433-441. DOI: https://doi.org/10.1007/s12239-011-0051-7
|
|
Cited By 16 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
443 |
QUALITY EVALUATION OF CAR WINDOW MOTORS USING SOUND QUALITY METRICS
W.-H. CHO, J.-G. IH, S.-H. SHIN, J.-W. KIM
Int J Automot Technol. 2011;12(3):443-450. DOI: https://doi.org/10.1007/s12239-011-0052-6
|
|
Cited By 13 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
451 |
REDUCING THE MEMORY FOOTPRINT OF OSEK-BASED SYSTEMS VIA STACK SHARING AND LIGHT-WEIGHT READY QUEUES
D. PARK, J. YOO, J. PARK, S. HONG
Int J Automot Technol. 2011;12(3):451-460. DOI: https://doi.org/10.1007/s12239-011-0053-5
|
|
|
|
|
Other Fields of Automotive Engineering |
|
461 |
PERFORMANCE OPTIMIZATION OF CVT FOR TWO-WHEELED VEHICLES
C. H. ZHENG, W. S. LIM, S. W. CHA
Int J Automot Technol. 2011;12(3):461-468. DOI: https://doi.org/10.1007/s12239-011-0054-4
|
|
Cited By 19 |
|
|
|
|
> Previous issue
