|
|
|
Engine, Emission Technology |
|
1013 |
COOLING EFFECT OF METHANOL ON AN N-HEPTANE HCCI ENGINE USING A DUAL FUEL SYSTEM
B. THANAPIYAWANIT, J.-H. LU
Int J Automot Technol. 2012;13(7):1013-1021. DOI: https://doi.org/10.1007/s12239-012-0104-6
 
|
Cited By 14 |
|
|
|
|
|
Engine, Emission Technology |
|
1023 |
INVESTIGATION OF PARTICLE EMISSION CHARACTERISTICS FROM A DIESEL ENGINE WITH A DIESEL PARTICULATE FILTER FOR ALTERNATIVE FUELS
Z. C. LIU, D. WANG, J. TIAN, J. W. LIU, J. R. ZHANG
Int J Automot Technol. 2012;13(7):1023-1032. DOI: https://doi.org/10.1007/s12239-012-0105-5
|
|
Cited By 22 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
1033 |
OPTIMAL SYNTHESIS OF FUNCTION GENERATION IN STEERING LINKAGES
R. SANCIBRIAN, A. DE-JUAN, F. VIADERO
Int J Automot Technol. 2012;13(7):1033-1046. DOI: https://doi.org/10.1007/s12239-012-0106-4
|
|
Cited By 24 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
1047 |
DEVELOPMENT OF A NEW ANALYTICAL MODEL FOR A RAILWAY VEHICLE EQUIPPED WITH INDEPENDENTLY ROTATING WHEELS
J. KWAK, Y. CHO
Int J Automot Technol. 2012;13(7):1047-1056. DOI: https://doi.org/10.1007/s12239-012-0107-3
|
|
Cited By 24 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
1057 |
FUZZY ADAPTIVE SLIDING MODE CONTROLLER FOR AN AIR SPRING ACTIVE SUSPENSION
Y.-S. ZHAO, W.-N. BAO, L.-P. CHEN, Y.-Q. ZHANG
Int J Automot Technol. 2012;13(7):1057-1065. DOI: https://doi.org/10.1007/s12239-012-0108-2
|
|
Cited By 23 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
1067 |
DEVELOPMENT OF A FAIL-SAFE CONTROL STRATEGY BASED ON EVALUATION SCENARIOS FOR AN FCEV ELECTRONIC BRAKE SYSTEM
K. JEON, H. HWANG, S. CHOI, S. HWANG, S. B. CHOI, K. YI
Int J Automot Technol. 2012;13(7):1067-1075. DOI: https://doi.org/10.1007/s12239-012-0109-1
|
|
Cited By 11 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
1077 |
NONLINEAR TIRE-ROAD FRICTION CONTROL BASED ON TIRE MODEL PARAMETER IDENTIFICATION
F. YU, K. LI, J. CAO
Int J Automot Technol. 2012;13(7):1077-1088. DOI: https://doi.org/10.1007/s12239-012-0110-8
|
|
Cited By 14 |
|
|
|
|
|
Automobile Body and Safety |
|
1089 |
EVALUATION OF THE ADEQUACY OF NECK INJURY INDICATORS ON BIORIDII IN A LOWER-REAR IMPACT SLED TEST
S.-W. KIM, S.-J. SHIM, M.-W. SUH
Int J Automot Technol. 2012;13(7):1089-1097. DOI: https://doi.org/10.1007/s12239-012-0111-7
|
|
Cited By 2 |
|
|
|
|
|
Automobile Body and Safety |
|
1099 |
DISPLACEMENT/STRESS LEVEL-CROSSING STOCHASTIC FINITE ELEMENT-BASED ALGORITHM FOR RELIABILITY ASSESSMENT OF VEHICLE COMPONENTS WITH LOADING AND MATERIAL UNCERTAINTIES
M. SHARIYAT, M. RAJABI GHAHNAVIEH
Int J Automot Technol. 2012;13(7):1099-1111. DOI: https://doi.org/10.1007/s12239-012-0112-6
|
|
Cited By 2 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
1113 |
REENGINEERING OF MANUFACTURING PROCESS DESIGN FOR QUALITY ASSURANCE IN AXLE- HUBS OF A MODERN CAR − A CASE STUDY
Z. HUDA
Int J Automot Technol. 2012;13(7):1113-1118. DOI: https://doi.org/10.1007/s12239-012-0113-5
|
|
Cited By 2 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
1119 |
RELATIONSHIP BETWEEN LEAN SIX SIGMA, ENVIRONMENTAL MANAGEMENT SYSTEMS, AND ORGANIZATIONAL PERFORMANCE IN THE MALAYSIAN AUTOMOTIVE INDUSTRY
N. F. HABIDIN, S. M. YUSOF
Int J Automot Technol. 2012;13(7):1119-1125. DOI: https://doi.org/10.1007/s12239-012-0114-4
|
|
Cited By 61 |
|
|
|
|
|
Materials and Recycling, Manufacturing |
|
1127 |
HIGH-STRAIN-RATE FRACTURE OF ADHESIVELY BONDED COMPOSITE JOINTS IN DCB AND TDCB SPECIMENS
M. S. HAN, J. U. CHO, A. KINLOCH, B. BLACKMAN, F. S. RODRIGUEZ SANCHEZ
Int J Automot Technol. 2012;13(7):1127-1131. DOI: https://doi.org/10.1007/s12239-012-0115-3
|
|
Cited By 10 |
|
|
|
|
|
Automobile Electronics |
|
1133 |
TECHNOLOGY ANALYSIS AND LOW-COST DESIGN OF AUTOMOTIVE RADAR FOR ADAPTIVE CRUISE CONTROL SYSTEM
S. H. JEONG, J. E. LEE, S. U. CHOI, J. N. OH, K. H. LEE
Int J Automot Technol. 2012;13(7):1133-1140. DOI: https://doi.org/10.1007/s12239-012-0116-2
|
|
Cited By 20 |
|
|
|
|
|
Automobile Electronics |
|
1141 |
CURRENT SENSORLESS DRIVE METHOD FOR ELECTRIC POWER STEERING
J. Y. YOO, J. H. LEE, H. T. MOON
Int J Automot Technol. 2012;13(7):1141-1147. DOI: https://doi.org/10.1007/s12239-012-0117-1
|
|
Cited By 15 |
|
|
|
|
|
Alternative Energy & Vehicle |
|
1149 |
COMBUSTION CHARACTERISTICS OF LPG AND BIODIESEL MIXED FUEL IN TWO BLENDING RATIOS UNDER COMPRESSION IGNITION IN A CONSTANT VOLUME CHAMBER
W. C. CHOI, S. W. LEE, Y. S. CHO, J. H. LEE, Y. J. PARK
Int J Automot Technol. 2012;13(7):1149-1157. DOI: https://doi.org/10.1007/s12239-012-0118-0
|
|
Cited By 6 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
1159 |
FUZZY ENERGY MANAGEMENT STRATEGY FOR A HYBRID ELECTRIC VEHICLE BASED ON DRIVING CYCLE RECOGNITION
J. WU, C.-H. ZHANG, N.-X. CUI
Int J Automot Technol. 2012;13(7):1159-1167. DOI: https://doi.org/10.1007/s12239-012-0119-z
|
|
Cited By 99 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
1169 |
ROBUST YAW STABILITY CONTROL FOR ELECTRIC VEHICLES BASED ON ACTIVE FRONT STEERING CONTROL THROUGH A STEER-BY-WIRE SYSTEM
K. NAM, H. FUJIMOTO, Y. HORI
Int J Automot Technol. 2012;13(7):1169-1176. DOI: https://doi.org/10.1007/s12239-012-0120-6
|
|
Cited By 88 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
1177 |
BEES-ALGORITHM-BASED OPTIMIZATION OF COMPONENT SIZE AND CONTROL STRATEGY PARAMETERS FOR PARALLEL HYBRID ELECTRIC VEHICLES
V. T. LONG, N. V. NHAN
Int J Automot Technol. 2012;13(7):1177-1183. DOI: https://doi.org/10.1007/s12239-012-0121-5
|
|
Cited By 40 |
|
|
|
|
> Previous issue
