|
|
|
Engine, Emission Technology |
|
365 |
LIGHTWEIGHT MIXTURE FAULTS DETECTION METHOD FOR GASOLINE ENGINE USING ON-LINE TREND ANALYSIS
Shili Wu, Zhenmin Tang, Zhaosong Guo
Int J Automot Technol. 2017;18(3):365-375. DOI: https://doi.org/10.1007/s12239-017-0037-1
 
|
Cited By 5 |
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
377 |
NUMERICAL ANALYSIS AND EXPERIMENTAL STUDY ON THE PERFORMANCE OPTIMIZATION OF COLD STORAGE HEAT EXCHANGER INTEGRATED WITH EVAPORATOR
Daewoong Lee
Int J Automot Technol. 2017;18(3):377-385. DOI: https://doi.org/10.1007/s12239-017-0038-0
|
|
Cited By 3 |
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
387 |
HYDRAULIC RETARDERS FOR HEAVY VEHICLES: ANALYSIS OF FLUID MECHANICS AND COMPUTATIONAL FLUID DYNAMICS ON BRAKING TORQUE AND TEMPERATURE RISE
Hongpeng Zheng, Yulong Lei, Pengxiang Song
Int J Automot Technol. 2017;18(3):387-396. DOI: https://doi.org/10.1007/s12239-017-0039-z
|
|
Cited By 16 |
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
397 |
AERODYNAMIC STUDY OF A GENERIC CAR MODEL WITH WHEELS AND UNDERBODY DIFFUSER
Angel Huminic, Gabriela Huminic
Int J Automot Technol. 2017;18(3):397-404. DOI: https://doi.org/10.1007/s12239-017-0040-6
|
|
Cited By 29 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
405 |
MODEL-BASED FAULT DETECTION AND ISOLATION IN AUTOMOTIVE YAW MOMENT CONTROL SYSTEM
Seung-Han You, Young Man Cho, Jin-Oh Hahn
Int J Automot Technol. 2017;18(3):405-416. DOI: https://doi.org/10.1007/s12239-017-0041-5
|
|
Cited By 12 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
417 |
OPTIMAL LAUNCHING-INTENTION-AWARE CONTROL STRATEGY FOR AUTOMATED CLUTCH ENGAGEMENT
Yi-yong Yang, Zao-bei Zhu, Xiang-yu Wang, Zheng Chen, Zi-lin Ma
Int J Automot Technol. 2017;18(3):417-428. DOI: https://doi.org/10.1007/s12239-017-0042-4
|
|
Cited By 10 |
|
|
|
|
|
Automobile Body and Safety |
|
429 |
DEVELOPMENT OF KNOWLEDGE BASED BODY STRUCTURE CONCEPT DESIGN MODEL
Won-yong Ki, Seung-Jin Heo, Dae-Oh Kang, Hong Jae Yim, Kyung won Lee, Jung ho Kim, Chang kun Lee
Int J Automot Technol. 2017;18(3):429-437. DOI: https://doi.org/10.1007/s12239-017-0043-3
|
|
Cited By 2 |
|
|
|
|
|
Automobile Body and Safety |
|
439 |
DESIGN OPTIMIZATION OF THIN-WALLED CIRCULAR TUBULAR STRUCTURES WITH GRADED THICKNESS UNDER LATER IMPACT LOADING
Fengxiang Xu, Xiaojin Wan, Yisong Chen
Int J Automot Technol. 2017;18(3):439-449. DOI: https://doi.org/10.1007/s12239-017-0044-2
|
|
Cited By 17 |
|
|
|
|
|
Automobile Body and Safety |
|
451 |
CHARACTERISTIC ANALYSIS OF VEHICLE ROLLOVER ACCIDENTS: ROLLOVER SCENARIOS AND PREDICTION/WARNING
Inhwan Han, Kyungtae Roh
Int J Automot Technol. 2017;18(3):451-461. DOI: https://doi.org/10.1007/s12239-017-0045-1
|
|
Cited By 27 |
|
|
|
|
|
Automobile Body and Safety |
|
463 |
LUMPED MASS-SPRING MODEL CONSTRUCTION FOR CRASH ANALYSIS USING FULL FRONTAL IMPACT TEST DATA
Jae Moon Lim
Int J Automot Technol. 2017;18(3):463-472. DOI: https://doi.org/10.1007/s12239-017-0046-0
|
|
Cited By 13 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
473 |
ENERGY MANAGEMENT AND DESIGN OPTIMIZATION FOR A SERIES-PARALLEL PHEV CITY BUS
Yuanchun Cai, Minggao Ouyang, Fuyuan Yang
Int J Automot Technol. 2017;18(3):473-487. DOI: https://doi.org/10.1007/s12239-017-0047-z
|
|
Cited By 21 |
|
|
|
|
|
Alternative Energy & Vehicle |
|
489 |
SIMULATION OF MIXED GAS FORMATION FOR A SPRAY-WALL COMPLEX GUIDED LPG DIRECT INJECTION ENGINE
Bo-yan Xu, Xiang-long Liu, Long-long Jiang, Juan Xu
Int J Automot Technol. 2017;18(3):489-497. DOI: https://doi.org/10.1007/s12239-017-0048-y
|
|
Cited By 2 |
|
|
|
|
|
Automobile Electronics |
|
499 |
DESIGN OF FERRITE MAGNET CFSM TO IMPROVE SPEED RESPONSE OF EPS SYSTEM
Myung-Seop Lim, Dong-Min Kim, Jung-Pyo Hong
Int J Automot Technol. 2017;18(3):499-504. DOI: https://doi.org/10.1007/s12239-017-0049-x
|
|
Cited By 1 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
505 |
LATERAL HANDLING IMPROVEMENT WITH DYNAMIC CURVATURE CONTROL FOR AN INDEPENDENT REAR WHEEL DRIVE EV
Youngjin Jang, Minyoung Lee, In-Soo Suh, Kwanghee Nam
Int J Automot Technol. 2017;18(3):505-510. DOI: https://doi.org/10.1007/s12239-017-0050-4
|
|
Cited By 18 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
511 |
VEHICLE TRAJECTORY CHALLENGE IN PREDICTIVE ACTIVE STEERING ROLLOVER PREVENTION
Mohammad Ghazali, Mohammad Durali, Hassan Salarieh
Int J Automot Technol. 2017;18(3):511-521. DOI: https://doi.org/10.1007/s12239-017-0051-3
|
|
Cited By 16 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
523 |
CONCEPTUAL DESIGN OF HIGH-SPEED SEMI-LOW-FLOOR BOGIE FOR TRAIN-TRAM
Nak-Tak Jeong, Maosen Wang, Sehoon Yoo, Weon-Kyong Kim, Seok-Youn Han, Ho-Yong Lee, Myung-Won Suh
Int J Automot Technol. 2017;18(3):523-533. DOI: https://doi.org/10.1007/s12239-017-0052-2
|
|
Cited By 8 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
535 |
LOGICAL CONTROL APPROACH TO FUEL EFFICIENCY OPTIMIZATION FOR COMMUTING VEHICLES
Mingxin Kang, Yuhu Wu, Tielong Shen
Int J Automot Technol. 2017;18(3):535-546. DOI: https://doi.org/10.1007/s12239-017-0053-1
|
|
Cited By 9 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
547 |
NEW METHODOLOGY FOR DETERMINATION OF LOAD SPECTRA FOR THE VEHICLE ACCELERATED DURABILITY TESTING ASSOCIATED WITH THE TIME CORRELATED FATIGUE DAMAGE ANALYSIS METHOD
Jiawei Yu, Songlin Zheng, Jinzhi Feng, Lihui Zhao
Int J Automot Technol. 2017;18(3):547-560. DOI: https://doi.org/10.1007/s12239-017-0054-0
|
|
Cited By 24 |
|
|
|
|
> Previous issue
