Int J Automot Technol Search

CLOSE


International Journal of Automotive Technology > Volume 25(6); 2024 > Article
International Journal of Automotive Technology 2024;25(6): 1503-1515.
doi: https://doi.org/10.1007/s12239-024-00122-7
Localization and Mapping Based on Multi-feature and Multi-sensor Fusion
Danni Li , Yibing Zhao , Weiqi Wang , Lie Guo
School of Mechanical Engineering , Dalian University of Technology
PDF Links Corresponding Author.  Yibing Zhao  , Email. zhaoyibing@dlut.edu.cn
ABSTRACT
Simultaneous Localization and Mapping (SLAM) is the foundation for high-precision localization, environmental awareness, and autonomous decision-making of autonomous vehicles. It has developed rapidly, but there are still challenges such as sensor errors, data fusion, and real-time computing. This paper proposes an optimization-based fusion algorithm that integrates IMU data, visual data and LiDAR data to construct a high-frequency visual-inertial odometry. The odometry is employed to obtain the relative pose transformation during the LiDAR data acquisition process, and eliminate the distortion of the point cloud by interpolation. By utilizing the local curvatures, some edge and plane features are extracted by LiDAR after removing the distortion, which are further combined with local map alignment to reconstruct the LiDAR constrains. In addition, the LiDAR odometer can be obtained through the initial values provided by high-frequency visual-inertial odometry. To address the cumulative error in odometers, adjacent keyframe and multi descriptor fusion loop constraints are combined to construct back-end optimization constraints, solving for high-accuracy localization results and constructing a 3D point cloud map of the surroundings. Compared with some classical algorithm, results show that the accuracy of this paper's algorithm is better than the laser SLAM method and the multi-sensor fusion SLAM method. Besides, the laser-assisted multi-feature visual-inertial odometry localization accuracy is also better than that of the single-feature visual-inertial odometry. In summary, the newly proposed SLAM method can largely improve the accuracy of odometry in real traffic scenarios.
Key Words: SLAM, Data fusion, Autonomous driving, Automotive Engineering
TOOLS
Preview  Preview
Full text via DOI  Full text via DOI
Download Citation  Download Citation
  Print
Share:      
METRICS
0
Scopus
109
View
4
Download
Related article

Editorial Office
21 Teheran-ro 52-gil, Gangnam-gu, Seoul 06212, Korea
TEL: +82-2-564-3971   FAX: +82-2-564-3973   E-mail: manage@ksae.org
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Society of Automotive Engineers.                 Developed in M2PI
Close layer
prev next