| STRUCTURAL OPTIMIZATION OF A CIRCUMFERENTIAL FRICTION DISK BRAKE WITH CONSIDERATION OF THERMOELASTIC INSTABILITY |
| B.-C. SONG1, K.-H. LEE2 |
1NEXEN TIRE Corporation
2Dong-A University |
|
|
|
|
|
| ABSTRACT |
|
This research suggests a new disk brake design using circumferential friction on the disk of a front-wheel-drive passenger car. The paper compares mechanical performance between the conventional and suggested disk brakes under dynamic braking conditions. Thermoelastic instability is considered in simulation of the test condition. An optimization technique using a metamodel is introduced to minimize the weight of the suggested disk brake. To achieve this goal, the response defined in the optimization formulation is expressed in a mathematically explicit form with respect to the design variables by using a kriging surrogate model, resulting in a simple optimization problem. Then, the simulated annealing algorithm is utilized to find the global optimum. The design results obtained by the kriging method are compared with those obtained from ANSYS analysis. |
| Key Words:
Circumferential friction disk brake, Ventilated disk brake, Structural optimization, Thermoelastic instability, Kriging |
|
Preview 
Full text via DOI 
Download Citation
Print
