EFFECT OF DIRECT IN-CYLINDER CO2 INJECTION ON HCCI COMBUSTION AND EMISSION CHARACTERISTICS |
S. QU, K. DENG, L. SHI, Y. CUI |
Shanghai Jiao Tong University |
|
|
|
ABSTRACT |
Fuel injection during negative valve overlap period was used to realize diesel homogeneous charge compression ignition (HCCI) combustion. In order to control the combustion, CO2 in-cylinder injection was used to simulate external EGR. Effects of CO2 injection parameters (injection timing, quantity, pressure) on HCCI combustion and emission characteristics were investigated. Experimental results revealed that CO2 in-cylinder injection can control the start of combustion and effectively reduce NOx emission. Either advancing CO2 injection timing or increasing CO2 injection quantity can reduce peak cylinder pressure and mean gas temperature, delay the starts of low temperature reaction (LTR) and high temperature reaction (HTR), and lower pressure rise rate; NOx emission was reduced, while smoke, HC, and CO emissions increased. Since the combustion phase was improved, the indicated thermal efficiency was also improved. Injection pressure determines the amount of disturbance introduced into the cylinder. Generally, with the same injection quantity, higher injection pressure results in higher momentum flux and total momentum. Larger momentum flux and momentum has a stronger disturbance to air-fuel mixture, resulting in a more homogeneous mixture; therefore, larger injection pressure leads to lower NOx and smoke emissions. |
Key Words:
Homogeneous charge compression ignition, Gas injection system, Injection timing, Injection quantity |
|