|
Intelligent Vehicle / Transportation Systems |
|
|
DESIGN FACTOR OPTIMIZATION OF 3D FLASH LIDAR SENSOR BASED ON GEOMETRICAL MODEL FOR AUTOMATED VEHICLE AND ADVANCED DRIVER ASSISTANCE SYSTEM APPLICATIONS
C. H. JANG, C. S. KIM, K. C. JO, M. SUNWOO
Int J Automot Technol. 2017;18(1):147-156. DOI: https://doi.org/10.1007/s12239-017-0015-7
 
|
Cited By 17 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
INVESTIGATION ON EVALUATION OF YAW STABILITY FOR MEDIUM COMMERCIAL VEHICLES
B. KWON, S. KIM, K. YI
Int J Automot Technol. 2017;18(1):49-54. DOI: https://doi.org/10.1007/s12239-017-0005-9
|
|
Cited By 2 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
|
DEVELOPMENT OF ROUTE INFORMATION BASED DRIVING CONTROL ALGORITHM FOR A RANGE-EXTENDED ELECTRIC VEHICLE
J. M. PI, Y. S. BAK, Y. K. YOU, D. H. PARK, H. S. KIM
Int J Automot Technol. 2016;17(6):1101-1111. DOI: https://doi.org/10.1007/s12239-016-0107-9
|
|
Cited By 19 |
|
|
|
|
|
Heat Transfer, Fluid and Thermal Engineering |
|
|
GRILLE DESIGN FOR PASSENGER CAR TO IMPROVE AERODYNAMIC AND COOLING PERFORMANCE USING CFD TECHNIQUE
J. M. KIM, K. M. KIM, S. J. HA, M. S. KIM
Int J Automot Technol. 2016;17(6):967-976. DOI: https://doi.org/10.1007/s12239-016-0094-x
|
|
Cited By 17 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
|
FAULT-TOLERANT BRAKING CONTROL WITH INTEGERATED EMBs AND REGENERATIVE IN-WHEEL MOTORS
S. KIM, K. HUH
Int J Automot Technol. 2016;17(5):923-936. DOI: https://doi.org/10.1007/s12239-016-0090-1
|
|
Cited By 23 |
|
|
|
|
|
Alternative Energy & Vehicle |
|
|
EFFECT OF REGENERATIVE BRAKING ENERGY ON BATTERY CURRENT BALANCE IN A PARALLEL HYBRID GASOLINE-ELECTRIC VEHICLE UNDER FTP-75 DRIVING MODE
J. S. KIM, S. M. KIM, J. H. JEONG, S. C. JEONG, J. W. LEE
Int J Automot Technol. 2016;17(5):865-872. DOI: https://doi.org/10.1007/s12239-016-0084-z
|
|
Cited By 9 |
|
|
|
|
|
Automobile Body and Safety |
|
|
MINIMIZING PEDESTRIAN LOWER-LEG INJURY CONSIDERING RATE DEPENDENCE OF THE PLASTIC ENERGY ABSORBER
H. M. GIL, Y. D. KWON, D. H. KIM, Y. S. KIM
Int J Automot Technol. 2016;17(5):829-841. DOI: https://doi.org/10.1007/s12239-016-0081-2
|
|
Cited By 6 |
|
|
|
|
|
Automobile Body and Safety |
|
|
CRASHWORTHINESS OF CHROMIUM PLATED PLASTIC RADIATOR GRILLE
S. H. YOO, N. T. JEONG, K. S. KIM, S. M. YANG, J. H. LEE, S. H. CHOI, M. W. SUH
Int J Automot Technol. 2016;17(4):681-687. DOI: https://doi.org/10.1007/s12239-016-0067-0
|
|
|
|
|
Automobile Body and Safety |
|
|
LOOSENING ANALYSIS FOR FASTENING SCREW OF AUTOMOTIVE DOOR TRIM PARTS
S. M. YANG, S. H. YOO, D. S. GI, S. B. CHOI, K. S. KIM, N. T. JEONG, S. U. CHOI, M. W. SUH, J. H. LEE
Int J Automot Technol. 2016;17(4):671-679. DOI: https://doi.org/10.1007/s12239-016-0066-1
|
|
Cited By 7 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
ACCUMULATED TOLERANCE ANALYSIS OF SUSPENSION BY GEOMETRIC TOLERANCES BASED ON MULTIBODY ELASTOKINEMATIC ANALYSIS
S. K. KIM, S. S. KIM, Y. G. CHO, H. K. JUNG
Int J Automot Technol. 2016;17(2):255-263. DOI: https://doi.org/10.1007/s12239-016-0025-x
|
|
Cited By 7 |
|
|
|
|
|
Engine, Emission Technology |
|
|
PRESSURE MODEL BASED COORDINATED CONTROL OF VGT AND DUAL-LOOP EGR IN A DIESEL ENGINE AIR-PATH SYSTEM
S. KIM, S. CHOI, H. JIN
Int J Automot Technol. 2016;17(2):193-203. DOI: https://doi.org/10.1007/s12239-016-0019-8
|
|
Cited By 13 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
|
DROWSY BEHAVIOR DETECTION BASED ON DRIVING INFORMATION
M. S. WANG, N. T. JEONG, K. S. KIM, S. B. CHOI, S. M. YANG, S. H. YOU, J. H. LEE, M. W. SUH
Int J Automot Technol. 2016;17(1):165-173. DOI: https://doi.org/10.1007/s12239-016-0016-y
|
|
Cited By 45 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
|
URBAN DRIVING CYCLE FOR PERFORMANCE EVALUATION OF ELECTRIC VEHICLES
N. T. JEONG, S. M. YANG, K. S. KIM, M. S. WANG, H. S. KIM, M. W. SUH
Int J Automot Technol. 2016;17(1):145-151. DOI: https://doi.org/10.1007/s12239-016-0014-0
|
|
Cited By 28 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
|
HARDWARE-IN-THE-LOOP SIMULATION TO EVALUATE THE DRIVE PERFORMANCE OF THE ELECTRIC TWO-WHEELERS ON A MOTOR DYNAMOMETER
D. K. KANG, M. S. KIM
Int J Automot Technol. 2015;16(6):1031-1040. DOI: https://doi.org/10.1007/s12239-015-0105-3
|
|
Cited By 11 |
|
|
|
|
|
Other Fields of Automotive Engineering |
|
|
DEVELOPMENT OF A TIRE MODEL BASED ON AN ANALYSIS OF TIRE STRAIN OBTAINED BY AN INTELLIGENT TIRE SYSTEM
S. J. KIM, K.-S. KIM, Y.-S. YOON
Int J Automot Technol. 2015;16(5):865-875. DOI: https://doi.org/10.1007/s12239-015-0088-0
|
|
Cited By 33 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
|
FUEL ECONOMY ASSESSMENT OF NOVEL MULTI-MODE PARALLEL HYBRID ELECTRIC VEHICLE
S. J. KIM, Y.-S. YOON, S. KIM, K.-S. KIM
Int J Automot Technol. 2015;16(3):501-512. DOI: https://doi.org/10.1007/s12239-015-0052-z
|
|
Cited By 12 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
POWER TRANSMISSION DYNAMICS IN MICRO AND MACRO SLIP REGIONS FOR A METAL V-BELT CONTINUOUSLY VARIABLE TRANSMISSION UNDER EXTERNAL VIBRATIONS
J. JI, M. J. JANG, O. E. KWON, M. J. CHAI, H. S. KIM
Int J Automot Technol. 2014;15(7):1119-1128. DOI: https://doi.org/10.1007/s12239-014-0116-5
|
|
Cited By 10 |
|
|
|
|
|
Engine, Emission Technology |
|
|
COMPARISON STUDY ON CHARACTERISTICS OF NANO-SIZED PARTICLE NUMBER DISTRIBUTION BY USING CONDENSATION PARTICLE COUNTER CALIBRATED WITH SPRAY AND SOOT TYPE PARTICLE GENERATION METHODS
M. C. CHUNG, M. S. KIM, G. S. SUNG, S. M. KIM, J. W. LEE
Int J Automot Technol. 2014;15(6):877-884. DOI: https://doi.org/10.1007/s12239-014-0092-9
|
|
Cited By 1 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
|
VEHICLE VELOCITY ESTIMATION USING EFFECTIVE INERTIA FOR AN IN-WHEEL ELECTRIC VEHICLE
S. Y. KO, J. W. KO, S. M. LEE, J. S. CHEON, H. S. KIM
Int J Automot Technol. 2014;15(5):815-821. DOI: https://doi.org/10.1007/s12239-014-0085-8
|
|
Cited By 7 |
|
|
|
|
|
Automobile Body and Safety |
|
|
ROBUST DESIGN OPTIMIZATION OF FRONTAL STRUCTURES FOR MINIMIZING INJURY RISKS OF FLEX PEDESTRIAN LEGFORM IMPACTOR
Y. H. LEE, Y. J. JOO, J. S. PARK, Y. S. KIM, H. J. YIM
Int J Automot Technol. 2014;15(5):757-764. DOI: https://doi.org/10.1007/s12239-014-0079-6
|
|
Cited By 15 |
|
|
|
|
|
Engine, Emission Technology |
|
|
ON-ROAD CHASING MEASUREMENT OF EXHAUST PARTICLE EMISSIONS FROM DIESEL, CNG, LPG, AND DME-FUELED VEHICLES USING A MOBILE EMISSION LABORATORY
J. H. KWAK, H. S. KIM, J. H. LEE, S. H. LEE
Int J Automot Technol. 2014;15(4):543-551. DOI: https://doi.org/10.1007/s12239-014-0057-z
|
|
Cited By 38 |
|
|
|
|
|
Engine, Emission Technology |
|
|
EVALUATION AND VISUALIZATION OF STRATIFIED ULTRA-LEAN COMBUSTION CHARACTERISTICS IN A SPRAY-GUIDED TYPE GASOLINE DIRECT-INJECTION ENGINE
C. W. PARK, H. C. OH, S. D. KIM, H. S. KIM, S. Y. LEE, C. S. BAE
Int J Automot Technol. 2014;15(4):525-533. DOI: https://doi.org/10.1007/s12239-014-0055-1
|
|
Cited By 23 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
|
DEVELOPMENT OF AN AUTONOMOUS BRAKING SYSTEM USING THE PREDICTED STOPPING DISTANCE
D. H. LEE, S. K. KIM, C. S. KIM, K. S. HUH
Int J Automot Technol. 2014;15(2):341-346. DOI: https://doi.org/10.1007/s12239-014-0035-5
|
|
Cited By 34 |
|
|
|
|
|
Automobile Body and Safety |
|
|
INNOVATIVE DESIGN OPTIMIZATION STRATEGY FOR THE AUTOMOTIVE INDUSTRY
M. S. KIM, D. O. KANG, S. J. HEO
Int J Automot Technol. 2014;15(2):291-301. DOI: https://doi.org/10.1007/s12239-014-0030-x
|
|
Cited By 20 |
|
|
|
|
|
Automobile Chassis & Vehicle Dynamic |
|
|
CO-OPERATIVE CONTROL FOR REGENERATIVE BRAKING AND FRICTION BRAKING TO INCREASE ENERGY RECOVERY WITHOUT WHEEL LOCK
J. W. KO, S. Y. KO, I. S. KIM, D. Y. HYUN, H. S. KIM
Int J Automot Technol. 2014;15(2):253-262. DOI: https://doi.org/10.1007/s12239-014-0026-6
|
|
Cited By 62 |
|
|
|
|
|
Engine, Emission Technology |
|
|
DESIGN OF A COMPRESSOR-POWER-BASED EXHAUST MANIFOLD PRESSURE ESTIMATOR FOR DIESEL ENGINE AIR MANAGEMENT
H. JIN, S. CHOI, S. KIM
Int J Automot Technol. 2014;15(2):191-201. DOI: https://doi.org/10.1007/s12239-014-0021-y
|
|
Cited By 8 |
|
|
|
|
|
Alternative Energy & Vehicle |
|
|
DESIGN METHODOLOGY OF COMPONENT DESIGN ENVIRONMENT FOR PHEV
C. MA, S. Y. KO, K. Y. JEONG, H. S. KIM
Int J Automot Technol. 2013;14(5):785-795. DOI: https://doi.org/10.1007/s12239-013-0087-y
|
|
Cited By 14 |
|
|
|
|
|
Intelligent Vehicle / Transportation Systems |
|
|
CONCEPTUAL DESIGN OF ECONOMIC HYBRID VEHICLE SYSTEM USING CLUTCHLESS GEARED SMART TRANSMISSION
Y.-S. YOON, S. J. KIM, K.-S. KIM
Int J Automot Technol. 2013;14(5):779-784. DOI: https://doi.org/10.1007/s12239-013-0086-z
|
|
Cited By 25 |
|
|
|
|
|
Engine, Emission Technology |
|
|
IMPROVED HOT-STAMPING ANALYSIS OF TUBULAR BORON STEEL WITH DIRECT MEASUREMENT OF HEAT CONVECTION COEFFICIENT
J. K. PARK, Y. S. KIM, O. S. SEO, M. G. LEE, H. Y. KIM
Int J Automot Technol. 2013;14(5):717-722. DOI: https://doi.org/10.1007/s12239-013-0078-z
|
|
Cited By 12 |
|
|
|
|
|
Fuel Cell, Hybrid and Electrical Vehicle |
|
|
ANALYSIS OF A SHELL-AND-TUBE TYPE GAS-TO-GAS MEMBRANE HUMIDIFIER FOR AN AUTOMOTIVE POLYMER ELECTROLYTE MEMBRANE FUEL CELL POWER SYSTEM
S.-K. PARK, S.-Y. CHOE, T.-W. LIM, J.-S. KIM, D.-H. SEO, J. H. CHOI
Int J Automot Technol. 2013;14(3):449-457. DOI: https://doi.org/10.1007/s12239-013-0049-4
|
|
Cited By 5 |
|
|
|
|
> Browse Articles > Search
