Home | KSAE | E-Submission | Sitemap | Contact Us |  
top_img
Current Issue > Current Issue



Table of Contents | October, 2021  Vol. 22 No. 5 Previous Issue | Next Issue | Archive
Articles
 Body and Safety, Manufacturing, Materials and Recycling
1141 ANALYSIS OF LOAD CHARACTERISTIC AND CONTACT PATCH CHARACTERISTIC OF SUPPORT INSERT RUN-FLAT TIRE UNDER ZERO-PRESSURE CONDITION
Liguo Zang, Xingyu Wang, Chongyou Wu, Fei Teng, Shaoqing Yang
Int J Automot Technol. 2021;22(5):1141-1151.    DOI: https://doi.org/10.1007/s12239-021-0101-8
      
 Body and Safety, Chassis, Manufacturing, Materials and Recycling
1153 HYBRID STEEL SHEET TRENDS FOR AUTOMOTIVE STAMPINGS
Nimet Kardes Sever
Int J Automot Technol. 2021;22(5):1153-1158.    DOI: https://doi.org/10.1007/s12239-021-0102-7
      
 Transmission and Driveline, Vehicle Dynamics and Control
1159 BRAKING TORQUE ANALYSIS AND CONTROL METHOD OF A NEW MOTOR WITH EDDY-CURRENT BRAKING AND HEATING SYSTEM FOR ELECTRIC VEHICLE
Zhao Xiaojuan, Zhang Yulong, Ye Lezhi
Int J Automot Technol. 2021;22(5):1159-1168.    DOI: https://doi.org/10.1007/s12239-021-0103-6
      
 Connected Automated Vehicles and ITS, Electric, Fuel Cell, and Hybrid Vehicle, Vehicle Dynamics and Control
1169 HIERARCHICAL CONTROL OF YAW STABILITY AND ENERGY EFFICIENCY FOR DISTRIBUTED DRIVE ELECTRIC VEHICLES
Jing Changqing, Shu Hongyu, Song Yitong, Guo Cheng
Int J Automot Technol. 2021;22(5):1169-1188.    DOI: https://doi.org/10.1007/s12239-021-0104-5
      
 Engine and Emissions, Fuels and Lubricants
1189 EFFECT OF AGED LUBRICATING OIL ON THE REGENERATION OF DIESEL PARTICULATE FILTERS AND ASH PHYSICAL CHARACTERISTICS WITH NON-THERMAL PLASMA TECHNOLOGY
Nan Zhao, Yixi Cai, Yunxi Shi, Weikai Wang, Sijia Ni
Int J Automot Technol. 2021;22(5):1189-1200.    DOI: https://doi.org/10.1007/s12239-021-0105-4
      
 Materials and Recycling
1201 A PRACTICAL AXIAL CRUSH SIMULATION OF GLASS-FIBER MAT/PA6 COMPOSITE TUBES FOR APPLICATION OF AN ENERGY ABSORBER IN AUTOMOBILES
Geunsu Joo, Jinbong Kim, Mungyu Jeong, Youngchul Kim, Holger Böhm, Jonas Richter
Int J Automot Technol. 2021;22(5):1201-1213.    DOI: https://doi.org/10.1007/s12239-021-0106-3
      
 Body and Safety, Chassis, Manufacturing, Materials and Recycling
1215 STUDY ON WHEEL-SIDE DRIVE SYSTEM WITH A SINGLE TRAILING ARM
Bin Wang, Xinbo Chen, Hongming Lyu, Xinwei Niu
Int J Automot Technol. 2021;22(5):1215-1226.    DOI: https://doi.org/10.1007/s12239-021-0107-2
      
 Electric, Fuel Cell, and Hybrid Vehicle, Engine and Emissions, Heat Transfer, Fluid and Thermal Engineering
1227 WAKE FLOWS OF HIGHLY DETAILED HEAVY VEHICLES
Damien McArthur, David Burton, Timothy Crouch, Mark Thompson, John Sheridan
Int J Automot Technol. 2021;22(5):1227-1243.    DOI: https://doi.org/10.1007/s12239-021-0108-1
      
 Body and Safety, Chassis, Manufacturing, Materials and Recycling
1245 LIGHTWEIGHT CHASSIS COMPONENTS –THE DEVELOPMENT OF A HYBRID AUTOMOTIVE CONTROL ARM FROM DESIGN TO MANUFACTURE
Tobias Kloska, Xiangfan Fang
Int J Automot Technol. 2021;22(5):1245-1255.    DOI: https://doi.org/10.1007/s12239-021-0109-0
      
 Engine and Emissions, Fuels and Lubricants
1257 A STUDY ON THE PRESSURE DROP CHARACTERISTICS OF A PASSIVE FILTER SYSTEM FOR COLLECTING FINE BRAKE DUST
Il Sun Hwang, Young Lim Lee
Int J Automot Technol. 2021;22(5):1257-1265.    DOI: https://doi.org/10.1007/s12239-021-0110-7
      
 Body and Safety, Manufacturing, Materials and Recycling
1267 MATHEMATICAL MODEL VALIDATED BY A CRASH TEST TO BE USED AS KINEMATIC AND DYNAMIC STUDY FOR SIDE IMPACTS
Alexandru Ionut Radu, George Radu Toganel, Daniel Dragos Trusca
Int J Automot Technol. 2021;22(5):1267-1277.    DOI: https://doi.org/10.1007/s12239-021-0111-6
      
 Electric, Fuel Cell, and Hybrid Vehicle, Transmission and Driveline
1279 LIGHTWEIGHT DESIGN OF AN AUTOMOTIVE BATTERY-PACK ENCLOSURE VIA ADVANCED HIGH-STRENGTH STEELS AND SIZE OPTIMIZATION
Yongjun Pan, Yue Xiong, Lei Wu, Keshan Diao, Wei Guo
Int J Automot Technol. 2021;22(5):1279-1290.    DOI: https://doi.org/10.1007/s12239-021-0112-5
      
 Body and Safety, Chassis, Vehicle Dynamics and Control
1291 INTERACTIVE AND WORST-CASE OPTIMIZED ROBUST CONTROL FOR POTENTIAL APPLICATION TO GUARANTEEING ROLL STABILITY FOR INTELLIGENT HEAVY VEHICLE
Yulong Liu, Xuewu Ji, Kaiming Yang, Xiangkun He, Shirou Nakano
Int J Automot Technol. 2021;22(5):1291-1303.    DOI: https://doi.org/10.1007/s12239-021-0113-4
      
 Vision and Sensors
1305 EXPERIMENTAL STUDY ON TIRE-ROAD DYNAMIC CONTACT PRESSURE DISTRIBUTION USING FTIR IMAGING
Chen Liang, Daqian Zhu, Guolin Wang, Maoqing Shan
Int J Automot Technol. 2021;22(5):1305-1317.    DOI: https://doi.org/10.1007/s12239-021-0114-3
      
 Body and Safety, Chassis, Vehicle Dynamics and Control
1319 COLLABORATIVE OPTIMIZATION OF VEHICLE CRASHWORTHINESS UNDER FRONTAL IMPACTS BASED ON DISPLACEMENT ORIENTED STRUCTURE
Xi Liu, Rui Liang, Yuanzhi Hu, Xuebang Tang, Christophe Bastien, Ruibin Zhang
Int J Automot Technol. 2021;22(5):1319-1335.    DOI: https://doi.org/10.1007/s12239-021-0115-2
      
 Electric, Fuel Cell, and Hybrid Vehicle, Engine and Emissions, Heat Transfer, Fluid and Thermal Engineering
1337 EFFECTS OF BATTERY MODEL ON THE ACCURACY OF BATTERY SOC ESTIMATION USING EXTENDED KALMAN FILTER UNDER PRACTICAL VEHICLE CONDITIONS INCLUDING PARASITIC CURRENT LEAKAGE AND DIFFUSION OF VOLTAGE
Hyunjong Oh, Jeehwan Jeon, Sungjin Park
Int J Automot Technol. 2021;22(5):1337-1346.    DOI: https://doi.org/10.1007/s12239-021-0116-1
      
 Engine and Emissions, Fuels and Lubricants
1347 EFFECT OF EGR COMBINED WITH INTENSE TUMBLE FLOW ON A WELL-CALIBRATED COMMERCIAL TURBOCHARGED GDI ENGINE
Congbo Yin, Hao Pan, Zhendong Zhang, Haibing Zhu, Kai Shen
Int J Automot Technol. 2021;22(5):1347-1361.    DOI: https://doi.org/10.1007/s12239-021-0117-0
      
 Engine and Emissions, Fuels and Lubricants
1363 ANALYSIS OF REGIONAL CHARACTERISTICS OF TOTAL COST OF OWNERSHIP IN CALIFORNIA, THE UK, AND REPUBLIC OF KOREA
Keon-Hee Baek, Gyeong-Pil Kim, Deok-Ho Nam, Jae-Sik Kim, Chee-Hwan Jang, Myung-Won Suh
Int J Automot Technol. 2021;22(5):1363-1372.    DOI: https://doi.org/10.1007/s12239-021-0118-z
      
 Vision and Sensors
1373 DCFS-BASED ONLINE DRIVING PREFERENCES LEARNING APPROACH WITH APPLICATION TO PERSONALIZED LANE KEEPING CONTROLLER DESIGN
Jin Chen, Dihua Sun, Min Zhao, Yang Li
Int J Automot Technol. 2021;22(5):1373-1385.    DOI: https://doi.org/10.1007/s12239-021-0119-y
      
 Chassis, Connected Automated Vehicles and ITS, Electrical and Electronics, Vehicle Dynamics and Control
1387 RIDING COMFORT ENHANCEMENT USING C-SHAPED SPRING SUSPENSION
Chanhyuk Nam, Sungjin Choi, Sangeun Bae, Jangho Bae, Daehie Hong
Int J Automot Technol. 2021;22(5):1387-1395.    DOI: https://doi.org/10.1007/s12239-021-0120-5
      
 Electrical and Electronics, Heat Transfer, Fluid and Thermal Engineering, Transmission and Driveline
1397 RESEARCH ON THE DATA TRANSMISSION METHODS IN THE MAGNETO-THERMAL COUPLING MODEL FOR EDDY CURRENT BRAKING
Jinshan Tian, Desheng Li, Keyan Ning, Lezhi Ye
Int J Automot Technol. 2021;22(5):1397-1407.    DOI: https://doi.org/10.1007/s12239-021-0121-4
      
 Electric, Fuel Cell, and Hybrid Vehicle, Electrical and Electronics
1409 SENSORLESS CONTROL OF PERMANENT MAGNET SYNCHRONOUS MOTOR FOR ELECTRIC VEHICLE BASED ON PHASE LOCKED LOOP
Chen Qiping, Tian Yue, Kang Sheng, Yu Yinquan, Ding Junling, Xie Yinfei
Int J Automot Technol. 2021;22(5):1409-1414.    DOI: https://doi.org/10.1007/s12239-021-0122-3
      
 Body and Safety, Chassis, Manufacturing, Materials and Recycling
1415 FATAL INJURY RISK MODEL (FIRM) OF THE ROAD ACCIDENTS THAT OCCURRED IN RAINY CONDITIONS – A PROBABILISTIC APPROACH
Alin Drosu, Corneliu Cofaru, Mihaela Virginia Popescu
Int J Automot Technol. 2021;22(5):1415-1426.    DOI: https://doi.org/10.1007/s12239-021-0123-2
      
 Body and Safety, Manufacturing, Materials and Recycling
1427 LIGHTWEIGHT DESIGN OF CFRP-LAMINATED STRUCTURES BY COMBINING MICROSCOPICAL HOMOGENIZATION AND MACROSCOPICAL OPTIMIZATION
Fei Cheng, Chenggong Zheng, Yunfei Liu, Wenjie Zuo, Xinzhe Wang, Guikai Guo
Int J Automot Technol. 2021;22(5):1427-1436.    DOI: https://doi.org/10.1007/s12239-021-0124-1
      
 Connected Automated Vehicles and ITS, Electric, Fuel Cell, and Hybrid Vehicle, Vehicle Dynamics and Control
1437 A REVIEW OF OPTIMAL ENERGY MANAGEMENT STRATEGIES USING MACHINE LEARNING TECHNIQUES FOR HYBRID ELECTRIC VEHICLES
Changhee Song, Kiyoung Kim, Donghwan Sung, Kyunghyun Kim, Hyunjun Yang, Heeyun Lee, Gu Young Cho, Suk Won Cha
Int J Automot Technol. 2021;22(5):1437-1452.    DOI: https://doi.org/10.1007/s12239-021-0125-0
      
Editorial Office
21 Teheran-ro 52-gil, Gangnam-gu, Seoul 06212, Korea
TEL: +82-2-564-3971   FAX: +82-2-564-3973   E-mail: manage@ksae.org
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Society of Automotive Engineers.                 Developed in M2PI
Close layer
prev next