Home | KSAE | E-Submission | Sitemap | Contact Us |  
top_img
Previous issue > Previous issue



Table of Contents | June, 2020  Vol. 21 No. 3 Previous Issue | Next Issue | Archive
Articles
 Chassis, Connected Automated Vehicles and ITS, Electrical and Electronics, Vehicle Dynamics and Control
541 ADAPTIVE AUTHORITY ALLOCATION OF HUMAN-AUTOMATION SHARED CONTROL FOR AUTONOMOUS VEHICLE
Wu Yanhong, Wei Hanbing, Chen Xing, Xu Jin, Rahul Sharma
Int J Automot Technol. 2020;21(3):541-553.    DOI: https://doi.org/10.1007/s12239-020-0051-6
         Cited By 5
 Engine and Emissions, Fuels and Lubricants, Heat Transfer, Fluid and Thermal Engineering
555 EXPERIMENTAL STUDY ON THE SPRAY CHARACTERISTICS OF ETHANOL GASOLINE BLENDED FUEL IN A DIRECT INJECTION SYSTEM
Youngkun Kim, WoongIl Kim, Seungju Baek, Kihyung Lee
Int J Automot Technol. 2020;21(3):555-561.    DOI: https://doi.org/10.1007/s12239-020-0052-5
         Cited By 1
 Connected Automated Vehicles and ITS, Vehicle Dynamics and Control
563 MODEL PREDICTIVE LONGITUDINAL CONTROL FOR HEAVY-DUTY VEHICLE PLATOON USING LEAD VEHICLE PEDAL INFORMATION
Hyoungjong Wi, Honggi Park, Daehie Hong
Int J Automot Technol. 2020;21(3):563-569.    DOI: https://doi.org/10.1007/s12239-020-0053-4
         Cited By 4
 Engine and Emissions, Fuels and Lubricants
571 EGR PREDICTION OF DIESEL ENGINES IN STEADY-STATE CONDITIONS USING DEEP LEARNING METHOD
Sangyul Lee, Yongjoo Lee, Youngbok Lee, Minjae Kim, Seunghyup Shin, Jihwan Park, Kyoungdoug Min
Int J Automot Technol. 2020;21(3):571-578.    DOI: https://doi.org/10.1007/s12239-020-0054-3
         Cited By 5
 Engine and Emissions, Fuels and Lubricants
579 EFFECT OF SOOT PARTICLE SIZE ON FOUR BALL METALLIC WEAR USING ELECTRON MICROSCOPY IMAGE ANALYSIS
Preechar Karin, Warawut Amornprapa, Park Watanawongskorn, Eakkawut Saenkhumvong, Chinda Charoenphonphanich, Katsunori Hanamura
Int J Automot Technol. 2020;21(3):579-589.    DOI: https://doi.org/10.1007/s12239-020-0055-2
         Cited By 1
 Body and Safety, Chassis, Vehicle Dynamics and Control
591 VIBRO-ACOUSTIC RESPONSE IN VEHICLE INTERIOR AND EXTERIOR USING MULTIBODY DYNAMIC SYSTEMS DUE TO CLEAT IMPACTS
Myeong Jae Han, Chul Hyung Lee, Tae Won Park
Int J Automot Technol. 2020;21(3):591-602.    DOI: https://doi.org/10.1007/s12239-020-0056-1
      
 Vision and Sensors
603 RESEARCH ON PARKING SLOT TRACKING ALGORITHM BASED ON FUSION OF VISION AND VEHICLE CHASSIS INFORMATION
Peizhi Zhang, Zhuoping Yu, Lu Xiong, Dequan Zeng
Int J Automot Technol. 2020;21(3):603-614.    DOI: https://doi.org/10.1007/s12239-020-0057-0
         Cited By 1
 Manufacturing, Materials and Recycling
615 MEASUREMENT OF WELD ZONE PROPERTIES OF LASER-WELDED TAILOR-WELDED BLANKS AND ITS APPLICATION TO DEEP DRAWING
Yong Chan Hur, Daeyong Kim, Byung Min Kim, Chung Yun Kang, Myoung-Gyu Lee, Ji Hoon Kim
Int J Automot Technol. 2020;21(3):615-622.    DOI: https://doi.org/10.1007/s12239-020-0058-z
         Cited By 2
 Engine and Emissions, Heat Transfer, Fluid and Thermal Engineering
623 NUMERICAL STUDY ON THE EFFECTS OF TUMBLE AND SWIRL ON COMBUSTION AND EMISSION CHARACTERISTICS OF AN LPG DIRECT INJECTION ENGINE
Hogyeom Kim, Seung Yeob Lee, Hyeong Jun Kim, Jin Taek Chung
Int J Automot Technol. 2020;21(3):623-632.    DOI: https://doi.org/10.1007/s12239-020-0059-y
         Cited By 2
 Engine and Emissions, Fuels and Lubricants
633 EFFECT OF UNDERHOOD ARCHITECTURE ON AERODYNAMIC DRAG – SUGGESTION OF NEW CONCEPTS FOR FUEL CONSUMPTION REDUCTION
Jalal Faraj, Elias Harika, Mohamed Ramadan, Samer Ali, Fabien Harambat, Mahmoud Khaled
Int J Automot Technol. 2020;21(3):633-640.    DOI: https://doi.org/10.1007/s12239-020-0060-5
      
 Body and Safety, Manufacturing, Materials and Recycling
641 COUPLED GA-SA OPTIMIZATION ALGORITHM AND APPLICATION FOR COMPRESSIVE CURVED DAMPER SPRINGS OF AUTOMOTIVE LOCKUP CLUTCHES
Soeun Rhim, Cheol Kim, Yonghwan Choi
Int J Automot Technol. 2020;21(3):641-647.    DOI: https://doi.org/10.1007/s12239-020-0061-4
      
 Engine and Emissions, Fuels and Lubricants, Heat Transfer, Fluid and Thermal Engineering
649 LIMIT OF FUEL INJECTION RATE IN THE COMMON RAIL SYSTEM UNDER ULTRA-HIGH PRESSURES
Jianhui Zhao, Leonid Grekhov, Pengfei Yue
Int J Automot Technol. 2020;21(3):649-656.    DOI: https://doi.org/10.1007/s12239-020-0062-3
         Cited By 5
 Engine and Emissions, Fuels and Lubricants, Heat Transfer, Fluid and Thermal Engineering
657 EFFECTS OF NOZZLE L/D ON NEAR-FIELD DEVELOPMENT AND MACROSCOPIC SPRAY CHARACTERISTICS OF COMMON-RAIL DIESEL SPRAYS
Junkyu Park, Donghwan Kim, Sungwook Park
Int J Automot Technol. 2020;21(3):657-666.    DOI: https://doi.org/10.1007/s12239-020-0063-2
         Cited By 1
 Engine and Emissions, Fuels and Lubricants
667 EXPLORING THE EFFECTIVENESS OF A COMPLEX COATING TECHNIQUE FOR USE THE SMALLEST PARTS OF ADVANCED POWERTRAIN FUEL SYSTEM
Sung Chul Cha, Heon Joon Park, Jin Han Lee, Kwang Yool Ko, Chang Hyun Shin
Int J Automot Technol. 2020;21(3):667-673.    DOI: https://doi.org/10.1007/s12239-020-0064-1
      
 Transmission and Driveline, Vehicle Dynamics and Control
675 ADAPTIVE CRUISE CONTROLLER DESIGN WITHOUT TRANSITIONAL STRATEGY
Kyungsik Shin, Jaeho Choi, Kunsoo Huh
Int J Automot Technol. 2020;21(3):675-683.    DOI: https://doi.org/10.1007/s12239-020-0065-0
         Cited By 1
 Electrical and Electronics
685 OPTIMUM PLACEMENT OF THE 3-AXIS LF ANTENNA IN A SMALL MOBILE DEVICE FOR VEHICULAR APPLICATIONS
Jun Hur, Tae Heung Lim, Hosung Choo
Int J Automot Technol. 2020;21(3):685-690.    DOI: https://doi.org/10.1007/s12239-020-0066-z
      
 Vehicle Dynamics and Control
691 ESO-BASED TERMINAL SLIDING MODE CONTROL FOR UNCERTAIN FULL-CAR ACTIVE SUSPENSION SYSTEMS
Wang Gang
Int J Automot Technol. 2020;21(3):691-702.    DOI: https://doi.org/10.1007/s12239-020-0067-y
         Cited By 3
 Engine, Emission Technology
703 PERFORMANCE IMPROVEMENT OF THE PRESSURE RATIO AND ROTATIONAL SPEED CALCULATION OF A CENTRIFUGAL COMPRESSOR MODEL
Jaewoo Chung, Namho Kim, Siwon Lee, Beomho Lee, Deokjin Kim, Giyong Kim
Int J Automot Technol. 2020;21(3):703-711.    DOI: https://doi.org/10.1007/s12239-020-0068-x
      
 Chassis
713 DEVELOPMENT OF THE WEAR RESISTANT BALL NUT ASSEMBLY IN THE RACK-BASED ELECTRIC POWER STEERING
Soo Sik Chung, Young Ze Lee, Eun Seok Kim
Int J Automot Technol. 2020;21(3):713-718.    DOI: https://doi.org/10.1007/s12239-020-0069-9
      
 Connected Automated Vehicles and ITS, Human Factors and Ergonomics
719 ANALYSIS OF DRIVER’S EEG GIVEN TAKE-OVER ALARM IN SAE LEVEL 3 AUTOMATED DRIVING IN A SIMULATED ENVIRONMENT
Jiwon Lee, Ji Hyun Yang
Int J Automot Technol. 2020;21(3):719-728.    DOI: https://doi.org/10.1007/s12239-020-0070-3
         Cited By 4
 Transmission and Driveline, Vehicle Dynamics and Control
729 OPTIMIZATION-ORIENTED HIGH FIDELITY NFIR MODELS FOR ESTIMATING INDICATED TORQUE IN DIESEL ENGINES
Gokhan Alcan, Volkan Aran, Mustafa Unel, Metin Yilmaz, Cetin Gurel, Kerem Koprubasi
Int J Automot Technol. 2020;21(3):729-737.    DOI: https://doi.org/10.1007/s12239-020-0071-2
         Cited By 1
 Vehicle Dynamics and Control
739 ADAPTIVE SLIDING MODE CONTROL OF LATERAL STABILITY OF FOUR WHEEL HUB ELECTRIC VEHICLES
Shou-Tao Li, Hui Liu, Di Zhao, Qiu-Yuan Li, Yan-Tao Tian, De-Jun Wang, Ding-Li Yu
Int J Automot Technol. 2020;21(3):739-747.    DOI: https://doi.org/10.1007/s12239-020-0072-1
         Cited By 1
 Body and Safety, Manufacturing, Materials and Recycling
749 PREDICTING SAFER VEHICLE FONT-END SHAPES FOR PEDESTRIAN LOWER LIMB PROTECTION VIA A NUMERICAL OPTIMIZATION FRAMEWORK
Guibing Li, Huaxing Ma, Tongqi Guan, Guoqiang Gao
Int J Automot Technol. 2020;21(3):749-756.    DOI: https://doi.org/10.1007/s12239-020-0073-0
         Cited By 4
 Chassis, Connected Automated Vehicles and ITS, Electrical and Electronics, Vehicle Dynamics and Control
757 UNDERSTANDING METRICS OF VEHICLE CONTROL TAKE-OVER REQUESTS IN SIMULATED AUTOMATED VEHICLES
Jae Won Kim, Ji Hyun Yang
Int J Automot Technol. 2020;21(3):757-770.    DOI: https://doi.org/10.1007/s12239-020-0074-z
         Cited By 4
 Body and Safety, Manufacturing, Materials and Recycling
771 VOICE COIL ACTUATED (VCA) ENGINE MOUNT FOR VIBRATION REDUCTION IN AUTOMOBILE
Soo-Hyun Kim, Un Hwan Park, Jin Ho Kim
Int J Automot Technol. 2020;21(3):771-777.    DOI: https://doi.org/10.1007/s12239-020-0075-y
         Cited By 1
Editorial Office
21 Teheran-ro 52-gil, Gangnam-gu, Seoul 06212, Korea
TEL: +82-2-564-3971   FAX: +82-2-564-3973   E-mail: manage@ksae.org
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Society of Automotive Engineers.                 Developed in M2PI
Close layer
prev next