Home | KSAE | E-Submission | Sitemap | Contact Us |  
top_img
Previous issue > Previous issue



Table of Contents | June, 2006  Vol. 7   No.4 Previous Issue | Next Issue | Archive
Articles
 Engine, Emission Technology
385 MEASUREMENT OF CO2 CONCENTRATION AND A/F RATIO USING FAST NDIR ANALYZER ON TRANSIENT CONDITION OF SI ENGINE
S. W. LEE, W. S. KIM, J. H. LEE, J. I. PARK, J. S. YOO
Int J Automot Technol. 2006;7(4):385-390.
      
 Other Fields of Automotive Engineering
391 SOOT YIELD OF TURBULENT PREMIXED PROPANE-OXYGEN-INERT GAS FLAMES IN A CONSTANT-VOLUME COMBUSTOR AT HIGH PRESSURES
M. W. BAE, C. W. BAE, S. K. LEE, S. W. AHN
Int J Automot Technol. 2006;7(4):391-397.
      
 Alternative Energy & Vehicle
399 COMBUSTION CHARACTERISTICS OF ESTERIFIED RICE BRAN OIL AS AN ALTERNATIVE FUEL IN A DIESEL ENGINE
S. H. CHOI, Y. T. OH
Int J Automot Technol. 2006;7(4):399-406.
      
 
407 DEVELOPMENT ON ENHANCED LEAKED FUEL RECIRCULATION DEVICE OF LPLi ENGINE TO SATISFY SULEV STANDARD
C. L. MYUNG, H. KWAK, S. PARK
Int J Automot Technol. 2006;7(4):407-413.
      
 Engine, Emission Technology
415 LARGE EDDY SIMULATIONS OF TUMBLE AND SWIRL FORMATIONS IN ENGINE IN-CYLINDER FLOW
B. S. LEE, J. S. LEE
Int J Automot Technol. 2006;7(4):415-422.
      
 Other Fields of Automotive Engineering
423 HYBRID POWER FLOW ANALYSIS USING SEA PARAMETERS
Y.-H. PARK, S.-Y. HONG
Int J Automot Technol. 2006;7(4):423-439.
      
 Engine, Emission Technology
441 CORRELATION STUDY OF THE MEASURED TUMBLE RATIOS USING THREE DIFFERENT METHODS: STEADY FLOW RIG; 2-DIMENSIONAL PIV; AND 3-DIMENSIONAL PTV WATER FLOW RIG
M. J. KIM, S. H. LEE, W. T. KIM
Int J Automot Technol. 2006;7(4):441-448.
      
 Automobile Chassis & Vehicle Dynamic
449 DRIVER STEERING MODEL AND IMPROVEMENT TECHNIQUE OF VEHICLE MOVEMENT PERFORMANCE DURING DRIFT RUNNING
H. NOZAKI
Int J Automot Technol. 2006;7(4):449-457.
      
 Fuel Cell, Hybrid and Electrical Vehicle
459 DYNAMIC SIMULATION MODEL OF A HYBRID POWERTRAIN AND CONTROLLER USING CO-SIMULATION - PART I: POWERTRAIN MODELLING
B. CHO, N. D. VAUGHAN
Int J Automot Technol. 2006;7(4):459-468.
      
 Automobile Chassis & Vehicle Dynamic
469 OPTIMAL PREVIEW CONTROL OF TRACKED VEHICLE SUSPENSION SYSTEMS
I. YOUN, S. LEE, M. TOMIZUKA
Int J Automot Technol. 2006;7(4):469-475.
      
 Other Fields of Automotive Engineering
477 DEVELOPMENT OF A VIBRATION MODEL OF A HELICAL GEAR PAIR FOR VEHICLE TRANSMISSION
W. S. KO, H. W. LEE, N. G. PARK
Int J Automot Technol. 2006;7(4):477-483.
      
 Automobile Body and Safety
485 SERRATION MECHANISM OF AA5182/POLYPROPYLENE/AA5182 SANDWICH SHEETS
K. J. KIM
Int J Automot Technol. 2006;7(4):485-492.
      
 Fuels and Lubricants
493 DISTRIBUTION OF FUEL MASS AFTER WALL IMPINGEMENT OF DIESEL SPRAY
K. N. KO, J. C. HUH, M. ARAI
Int J Automot Technol. 2006;7(4):493-500.
      
 Engine, Emission Technology
501 MODELLING STUDY OF THE EFFECT OF CHEMICAL ADDITIVES ON SOOT PRECURSORS REDUCTION
J. K. PARK
Int J Automot Technol. 2006;7(4):501-508.
      
 Intelligent Vehicle / Transportation Systems
509 OVERVIEW OF TELEMATICS: A SYSTEM ARCHITECTURE APPROACH
K. Y. CHO, C. H. BAE, Y. CHU, M. W. SUH
Int J Automot Technol. 2006;7(4):509-517.
      
Editorial Office
21 Teheran-ro 52-gil, Gangnam-gu, Seoul 06212, Korea
TEL: +82-2-564-3971/2   FAX: +82-2-564-3973   E-mail: car@ksae.org
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Society of Automotive Engineers. All rights reserved.                 Developed in M2community
Close layer
prev next