| Home | KSAE | E-Submission | Sitemap | Contact Us |  
top_img
International Journal of Automotive Technology > Volume 19(6); 2018 > Article
International Journal of Automotive Technology 2018;19(6): 1055-1059.
CREEP LIFE PREDICTION OF ALLOY 718 FOR AUTOMOTIVE ENGINE MATERIALS
Yu Sik Kong1, Jiyoung Yu2, Young Whan Park1
1Pukyong National University
2Hyundai Steel Company
PDF Links Corresponding Author.  Young Whan Park , Email. parkyw@pknu.ac.kr
ABSTRACT
This study was carried out to investigate the creep life at the high temperature of the Alloy 718 for automotive engine components using the initial strain parameter method (ISPM). Creep tests have performed at elevated temperatures in the range of 550 oC to 700 oC in this work. We also carried out constant stress creep tests. The initial strains were measured during 1 minute after loading. Both the creep stress and rupture time depend on the initial strain. We calculated the creep life of Alloy 718 by using the creep life prediction equations obtained from the ISPM. Then, we compared the creep life predicted by the ISPM to the Larson-Miller parameter (LMP). The experimental rupture time and the calculated rupture time by using the ISPM agreed with a confidence level of 95 %. The creep life predicted by using the ISPM was in very good agreement with the creep life predicted using the LMP method.
Key Words: Initial Strain Parameter Method (ISPM), Elevated temperatures, Ni-based Alloy 718, Creep life prediction, Larson-Miller Parameter (LMP)
Editorial Office
21 Teheran-ro 52-gil, Gangnam-gu, Seoul 06212, Korea
TEL: +82-2-564-3971/2   FAX: +82-2-564-3973   E-mail: car@ksae.org
About |  Browse Articles |  Current Issue |  For Authors and Reviewers
Copyright © The Korean Society of Automotive Engineers. All rights reserved.                 Developed in M2community
Close layer
prev next