| FINITE-ELEMENT ANALYSIS OF QUASISTATIC FRACTURE IN CV JOINTS UNDER FULL-TURN AND FULL-THROTTLE CONDITIONS |
| I. RYU, Y. LIM |
| Hyundai WIA |
|
|
|
|
| |
| ABSTRACT |
|
Quasistatic fractures at high joint angles constitute a chronic quality problem in CV joints. This type of fracture occurs when a driver unintentionally depresses the brake and accelerator simultaneously under a full-turn retreat condition. In general, the cage in a ball joint can be broken only at these high joint angles. Here we present a flexible quasistatic simulation model developed to simulate fracture in a CV joint. The cause and process of the quasistatic fracture were analyzed using simulations and physical tests. Static fracture simulations and tests at high joint angles showed that, initially, only one of the six cage posts was damaged. In a simulation of one revolution at constant torque, we found that an imbalance in ball loads generated an excessive cage load. Moreover, if this high cage load was applied when the cage protruded outward, the cage post was subjected to severe shear loading. The cage post was damaged in this specific rotational range. Quasistatic fracture simulations and tests at high joint angles showed that all six cage posts were damaged sequentially. Because entire cage posts were damaged, the quasistatic fracture torque was approximately half of the static torque. The plastic strain in each cage post displayed one step-like jump per revolution in the quasistatic simulations. The ball indentation created by a high ball load was interrupted by the cage-window edges as the ball joint rotated. This hindrance by ball indentation triggered the final breakage of the cage, although it was not the major cause of cage fractures. |
| Key Words:
CV joint, Ball joints, Cage, Cage post, Quasistatic fracture, Static fracture |
|
|
|
Preview
Full text via DOI
Download Citation 
Print 
