|
|
|
Electric, Fuel Cell, and Hybrid Vehicle, Transmission and Driveline |
|
553 |
STUDY ON COMPONENTS DURABILITY TEST CONDITIONS BASED ON COMBINED CLUSTERING AND MARKOV CHAIN METHOD
Yaohua Li, Yang Liu, Pandeng Shao, Zetian Li, Weiping Song
Int J Automot Technol. 2021;22(3):553-560. DOI: https://doi.org/1.10.1007/s12239-021-0051-1
|
|
|
|
|
Body and Safety, Manufacturing, Materials and Recycling |
|
561 |
INVESTIGATION OF THE EFFECTS OF UNEVEN PLATEAU GRINDING ON FRICTION, WEAR RATE, AND LOCALIZED SURFACE DAMAGE ON INTERNAL COMBUSTION ENGINE CYLINDER LINERS
Eun-Seok Kim, Young-Ze Lee
Int J Automot Technol. 2021;22(3):561-567. DOI: https://doi.org/10.1007/s12239-021-0052-0
|
|
|
|
|
Engine and Emissions, Fuels and Lubricants |
|
569 |
A STUDY OF PREDICTION BASED ON REGRESSION ANALYSIS FOR REAL-WORLD CO2 EMISSIONS WITH LIGHT-DUTY DIESEL VEHICLES
Junepyo Cha, Junhong Park, Hyoungwook Lee, Mun Soo Chon
Int J Automot Technol. 2021;22(3):569-577. DOI: https://doi.org/10.1007/s12239-021-0053-z
 
|
Cited By 9 |
|
|
|
|
|
Electric, Fuel Cell, and Hybrid Vehicle, Transmission and Driveline |
|
579 |
ASSESSING THE ESTIMATED LIFE OF UD DRUM OF AUTOMATIC TRANSMISSION USING MATERIAL PROPERTIES EVALUATED BY STRESS RUPTURE TESTING
Jung-Jun Lee, Sungki Choi, Chan Pyoung Park, Park Kwon
Int J Automot Technol. 2021;22(3):579-584. DOI: https://doi.org/10.1007/s12239-021-0054-y
|
|
|
|
|
Body and Safety, Chassis, Manufacturing, Materials and Recycling |
|
585 |
OPTIMIZATION OF WELDING PARAMETERS FOR RESISTANCE SPOT WELDING OF AA3003 TO GALVANIZED DP780 STEEL USING RESPONSE SURFACE METHODOLOGY
Jin-Hee Bae, Yeong-Do Park, Mokyoung Lee
Int J Automot Technol. 2021;22(3):585-593. DOI: https://doi.org/10.1007/s12239-021-0055-x
|
|
Cited By 2 |
|
|
|
|
|
Body and Safety, Manufacturing, Materials and Recycling |
|
595 |
INJURIES ANALYSIS OF REAR ROW OCCUPANTS EXPOSED TO VEHICLE’S FRONTAL OBLIQUE COLLISION
Hua Zhou, Jingqian Liao, Qiaoyu Zhang, Guanghui Zhang, Daowen Zhang
Int J Automot Technol. 2021;22(3):595-607. DOI: https://doi.org/10.1007/s12239-021-0056-9
|
|
Cited By 3 |
|
|
|
|
|
Body and Safety, Chassis, Manufacturing, Materials and Recycling |
|
609 |
GEOMETRY OPTIMIZATION FOR A RUBBER MOUNT WITH DESIRED STIFFNESS VALUES IN TWO LOADING DIRECTIONS CONSIDERING HYPERELASTICITY AND VISCOELASTICITY
Chih-Hsing Liu, Yi-Yao Hsu, Shih-Hao Yang
Int J Automot Technol. 2021;22(3):609-619. DOI: https://doi.org/10.1007/s12239-021-0057-8
|
|
Cited By 3 |
|
|
|
|
|
Body and Safety, Manufacturing, Materials and Recycling |
|
621 |
INDUCTION SYSTEM WITH DEFORMATION CONTROL UNIT FOR LOCAL SOFTENING OF HOT-STAMPED PARTS
Dong Kyu Kim, Young Yun Woo, Woo Jeong Sim, Won Hyuk Kim, Ji Hoon Kim, Young Hoon Moon
Int J Automot Technol. 2021;22(3):621-629. DOI: https://doi.org/10.1007/s12239-021-0058-7
|
|
Cited By 1 |
|
|
|
|
|
Body and Safety, Chassis, Manufacturing, Materials and Recycling |
|
631 |
DATA-BASED IDENTIFICATION OF THE TIRE CORNERING PROPERTIES VIA PIECEWISE AFFINE APPROXIMATION
Xiaoqiang Sun, Weiwei Hu, Yingfeng Cai, Pak Kin Wong, Long Chen
Int J Automot Technol. 2021;22(3):631-641. DOI: https://doi.org/10.1007/s12239-021-0059-6
|
|
Cited By 1 |
|
|
|
|
|
Chassis, Electric, Fuel Cell, and Hybrid Vehicle, Transmission and Driveline, Vehicle Dynamics and Control |
|
643 |
STUDY ON ANTI-ROLLOVER OF THE COUNTERBALANCE FORKLIFT BASED ON EXTENSION HIERARCHICAL CONTROL
Guang Xia, Jiacheng Li, Xiwen Tang, Linfeng Zhao, Baoqun Sun
Int J Automot Technol. 2021;22(3):643-656. DOI: https://doi.org/10.1007/s12239-021-0060-0
|
|
Cited By 2 |
|
|
|
|
|
Body and Safety, Manufacturing, Materials and Recycling |
|
657 |
A METHOD FOR PREDICTING HIC15, CHEST G’S AND CHEST DEFLECTION BASED ON RESULTS OF USNCAP FRONTAL IMPACT TESTS
Jae Moon Lim
Int J Automot Technol. 2021;22(3):657-663. DOI: https://doi.org/10.1007/s12239-021-0061-z
|
|
|
|
|
Noise, Vibration and Harshness |
|
665 |
PREDICTION AND ANALYSIS OF DIESEL ENGINE COMBUSTION NOISE USING TRANSFER FUNCTION METHOD
Zhaoyi Wei, Liang Zheng, Li Huang, Wenzhi Gao, Yong Li, Xinying Zhao, Rui Liu
Int J Automot Technol. 2021;22(3):665-676. DOI: https://doi.org/10.1007/s12239-021-0062-y
|
|
Cited By 2 |
|
|
|
|
|
Vehicle Dynamics and Control |
|
677 |
PATH FOLLOWING CONTROL OF AUTOMATED GUIDED VEHICLE BASED ON MODEL PREDICTIVE CONTROL WITH STATE CLASSIFICATION MODEL AND SMOOTH TRANSITION STRATEGY
Xun Weng, Jingtian Zhang, Ying Ma
Int J Automot Technol. 2021;22(3):677-686. DOI: https://doi.org/10.1007/s12239-021-0063-x
|
|
Cited By 4 |
|
|
|
|
|
Materials and Recycling |
|
687 |
A STUDY ON CURING TEMPERATURE AND FRACTURE MECHANISM OF CARBON AND GLASS FIBER REINFORCED POLYMERS USING AN ELECTRON MICROSCOPY
Tial Cuai Man, Preechar Karin, Ye Htet Lin, Patcharee Larpsuriyakul, Naoto Ohtake
Int J Automot Technol. 2021;22(3):687-700. DOI: https://doi.org/10.1007/s12239-021-0064-9
|
|
Cited By 2 |
|
|
|
|
|
Materials and Recycling |
|
701 |
NUMERICAL ANALYSIS OF NOTCH EFFECT ON FATIGUE BEHAVIOR OF SHORT FIBER REINFORCED PLASTICS USING MULTI-SCALE MATERIAL MODELING
Young Man Kim, Yong Hwan Kim
Int J Automot Technol. 2021;22(3):701-711. DOI: https://doi.org/10.1007/s12239-021-0065-8
|
|
|
|
|
Connected Automated Vehicles and ITS |
|
713 |
SIMULATING THE EFFECT OF AUTONOMOUS VEHICLES ON ROADWAY MOBILITY IN A MICROSCOPIC TRAFFIC SIMULATOR
Ozgenur Kavas-Torris, Nathan Lackey, Levent Guvenc
Int J Automot Technol. 2021;22(3):713-733. DOI: https://doi.org/10.1007/s12239-021-0066-7
|
|
Cited By 1 |
|
|
|
|
|
Engine and Emissions, Fuels and Lubricants |
|
735 |
PERFORMANCE ANALYSIS AND OPTIMIZATION DESIGN OF EXHAUST SYSTEM FOR TURBOCHARGING DIESEL ENGINES
Fushui Liu, Chenghan Sun, Yikai Li, Yong Shang
Int J Automot Technol. 2021;22(3):735-745. DOI: https://doi.org/10.1007/s12239-021-0067-6
|
|
Cited By 4 |
|
|
|
|
|
Engine and Emissions, Fuels and Lubricants |
|
747 |
INFLUENCE OF INTER-VEHICLE DISTANCE ON THE AERODYNAMICS OF A TWO-TRUCK PLATOON
Johannes Törnell, Simone Sebben, David Söderblom
Int J Automot Technol. 2021;22(3):747-759. DOI: https://doi.org/10.1007/s12239-021-0068-5
|
|
Cited By 6 |
|
|
|
|
|
Chassis, Electric, Fuel Cell, and Hybrid Vehicle, Transmission and Driveline, Vehicle Dynamics and Control |
|
761 |
CONTROL STRATEGY FOR AN ELECTROMECHANICALTRANSMISSION VEHICLE BASED ON A DOUBLE MARKOV PROCESS
Hui Liu, Riming Xu, Lijin Han, Shanshan Xiong
Int J Automot Technol. 2021;22(3):761-770. DOI: https://doi.org/10.1007/s12239-021-0069-4
|
|
Cited By 3 |
|
|
|
|
|
Body and Safety, Noise, Vibration and Harshness |
|
771 |
IDENTIFICATION OF INFLUENCE OF CROSS COUPLING ON TRANSFER PATH ANALYSIS BASED ON OPAX AND OTPA IN A DUMMY CAR
Kanghyun An, Sang-Kwon Lee
Int J Automot Technol. 2021;22(3):771-778. DOI: https://doi.org/10.1007/s12239-021-0070-y
|
|
Cited By 2 |
|
|
|
|
|
Chassis, Electric, Fuel Cell, and Hybrid Vehicle, Transmission and Driveline, Vehicle Dynamics and Control |
|
779 |
SYSTEM FOR CHANGING ADHESION CONDITIONS IN EXPERIMENTAL ROAD VEHICLE
Petr Jilek, Jan Němec
Int J Automot Technol. 2021;22(3):779-785. DOI: https://doi.org/10.1007/s12239-021-0071-x
|
|
Cited By 3 |
|
|
|
|
|
Body and Safety, Chassis, Manufacturing, Materials and Recycling |
|
787 |
STRUCTURAL IMPROVEMENT OF VEHICLE COMPONENT BASED ON THE LOAD PATH AND LOAD DISTRIBUTION ANALYSIS
Zhaohua Wang, Qingguo Wang, Nan Wu, Baosu Guo, Fenghe Wu
Int J Automot Technol. 2021;22(3):787-798. DOI: https://doi.org/10.1007/s12239-021-0072-9
|
|
Cited By 3 |
|
|
|
|
|
Connected Automated Vehicles and ITS |
|
799 |
OPTIMIZATION DESIGN OF THE DECENTRALIZED MULTI-VEHICLE COOPERATIVE CONTROLLER FOR FREEWAY RAMP ENTRANCE
Jiawei Wang, Fangwu Ma, Yang Yu, Sheng Zhu, Sukru Yaren Gelbal, Bilin Aksun-Guvenc, Levent Guvenc
Int J Automot Technol. 2021;22(3):799-810. DOI: https://doi.org/10.1007/s12239-021-0073-8
|
|
Cited By 4 |
|
|
|
|
|
Engine and Emissions, Fuels and Lubricants |
|
811 |
DISCRETE-TIME PREVIEW-FEEDBACK H CONTROL FOR SELECTIVE CATALYTIC REDUCTION SYSTEMS
Jihoon Lim, Patrick Kirchen, Youngdeok Han, Ryozo Nagamune
Int J Automot Technol. 2021;22(3):811-821. DOI: https://doi.org/10.1007/s12239-021-0074-7
|
|
|
|
|
Body and Safety, Chassis, Manufacturing, Materials and Recycling |
|
823 |
GEOMETRY OPTIMIZATION OF A METALLIC FLEXOR FOR FLAT WIPERS
Ting Chuan Huang, Jian Wei Tsai, Kuo Chi Liao
Int J Automot Technol. 2021;22(3):823-830. DOI: https://doi.org/10.1007/s12239-021-0075-6
|
|
|
|
> Previous issue
